Jump to content

Mini spiral RGB strip tree


Recommended Posts

Each strip is 8' and a few inches.

 

I'm thinking about using 1/4" copper tubing so I can collapse them down for storage. This tubing isn't terribly expensive but more than twice what 1/2" conduits costs per foot. I think 1/2" conduit would be too rigid.

Any other ideas for ways to support a spiral tree that don't include fishing line?

Link to post
Share on other sites

Check out this post on my Display FB page:

I use 1/16" aircraft cable and turnbuckles that have hooks. This makes my Spriral tree easy to set up and take down as the cable stays attached to the hook head all the time. 

 

Link to post
Share on other sites
On 6/17/2016 at 6:45 PM, zman said:

Check out this post on my Display FB page:

I use 1/16" aircraft cable and turnbuckles that have hooks. This makes my Spriral tree easy to set up and take down as the cable stays attached to the hook head all the time. 

 

Each of these will probably be 3-4' tall. Only using one LED strip per tree. 

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...