Jump to content
Light-O-Rama Forums
futuretechguy

Can a CF50D (flood) be configured as a prop in the Pixel Editor

Recommended Posts

I have the (CF50D) 50 Watt Cosmic Color Flood successfully configured in the Sequence Editor but I need to move it to the PE as a prop (all but two of my props are sequenced in the PE)) but I can't seem to get it to work. It is manually set (DIP Switch) to LOR ID13 (DMX Start 19)  and so far all the combinations have not worked, I tried LOR with one bulb and a channel for each color as in the SE.

 

Can someone point me in the right direction please.

Share this post


Link to post
Share on other sites

Did you setup as a rgb dumb in pixel editor Then select bulb. In props then flood and expand bulb size in preview layout. Add universe and start channel

Share this post


Link to post
Share on other sites

are you using in dmx or lor mode do have the jumpers set correct for the mode your using ?

Share this post


Link to post
Share on other sites

if you run in lor mode in the pixel editor the flood needs to be on a enhanced network in network preferances and has to have the latest firmware,  all lor controllers need to be on enhanced network for the pixel editor to control lights if your in dmx mode they will turn on in the pixel editor.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...