Jump to content

Missing RGB channels


mackdave

Recommended Posts

SuperStar applies a "dimming curve" to the channels to make the LEDs in the RGB lights dim more smoothly. The result of applying a dimming curve is that intensities that are dim become dimmer. For example, 50 will become an intensity of about 25, 30 will become an intensity of about 9. Intensities that are lower than 30 will be hard to see in the sequence editor.

 

In the sequence editor you can hover the mouse over a channel and it will show the intensity of the red, green and blue elements. Check to see if channels 1 and 3 truly are missing or if they are real dim.

 

If they are truly missing, please email your .sup file to brian@superstarlights.com and I will export it to see if I can duplicate the problem. The .sup file will be at:

 

c:/ (your lightorama folder) / SuperStar / Sequences

 

Also, it shouldn't matter, but what version of superstar are you running? The version is in the top left of superstar and will be something like v3.9.0

Link to post
Share on other sites

Yes, send the visualization and the sup file to brian@superstarlights.com

 

The visualization file will be at:

 

c:/ (your lightorama folder) / Visualizations / Editor

 

The sup file will be at:

 

c:/ (your lightorama folder) / SuperStar / Sequences

Link to post
Share on other sites

I went into SS and add a all white morph from top to bottom saved and all the channels exported. It looked like it was only exporting the channels with colors I used.

Link to post
Share on other sites

It should be exporting all the channels even if the sequence is empty. Please email your visualization file to brian@superstarlights.com   I would like to take a look at it.

Link to post
Share on other sites

Since upgrading to 3.12.2 I see the same when exporting.

 

As long as I use all 3 colors then all 3 export.  If I don't use all 3 then whatever color I don't use is not exported.

 

Have to admit it is rare that I don't use all 3 colors on an element in any given song so I don't know if this has been there before.  But I did just notice it after the upgrade.

 

Visualization file is the same as 3.12

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...