Jump to content
Light-O-Rama Forums
larryk5

Can't reset G3 controller, what am I doing wrong?

Recommended Posts

I have my controller 2 acting up! Channels stop working, several of them, so I thought I would reset the controller!

 

It won't reset! I followed the manual; turn off unit, move jumper to pins 5/6, power unit up, fast flashing light, power down controller, move jumper back to 4/5, power up, get solid green! At least that's what I think is the correct way.

 

in the HU I would expect the controller to show up as unit one, that what the manual states. It finds the controller, but it's still unit id 2!

 

Question; when then the jumper is on pins 5/6 and flashing red fast, do I just unplug the controller or should something else happen. I left in flashing for about 20 seconds.

 

Thanks

Share this post


Link to post
Share on other sites

Resetting no longer clears the unit ID.

 

If the light is flashing fast, the reset is complete.  Unplug the unit and return the jumper to the correct position.

Share this post


Link to post
Share on other sites

Mike

I did that but the HU still is showing it as controller id 2.

 

Also; I don't know how fast it should do the fast flashing thing. It does it as soon as I plug it in.

Can the controller still be connected to the PC when I do the reset?

 

Sorry Mike didn't read your post correctly, it DOESN"T change the id! That's good!

Edited by larryk5

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...