E682 not responding to LOR commands

[TP1 CONSULTING]

turns out: control lights keeps de-selecting, have never seen that before?

[Crazydave]

the lights can only be controlled by one thing at a time.... either the sequence editor   or the the control panel

Disable any shows/schedules in the control panel and the sequence editor control lights should work

[CK57]

To check a sequence Control the lights is checked. When you exit the sequence editor the control the lights box will be unchecked when you reopen the same sequence. Enabling a show has nothing to do with checking the control the lights check box, correct?

[Crazydave]

You CANNOT have a show running... or a schedule enabled if you want to "Control Lights" from the sequence Editor.

 

you will need to disable all shows/schedules in order to "Control Lights" from the sequence editor

 

If you have any shows/schedules running or enabled, it will uncheck the "Control Lights" for you.

 

LOR can only have one thing controlling the lights at a time. (It's either your sequence editor or your control panel.. but NOT both)

Edited December 2, 2014 by Crazydave

[k6ccc]

Or the hardware utility...

[jdoody]

Thanks Crazydave! your advice worked for me