steve synek Posted November 2, 2013 Share Posted November 2, 2013 I ran a test of my dmx dongle on my laptop (which I use for programing but not running my show) but now cannot figure out how to make it stop looking for something that isn't connected. It just keeps running- error cannot open adapter. Can anyone direct me?Thanks Steve Link to comment Share on other sites More sharing options...
k6ccc Posted November 2, 2013 Share Posted November 2, 2013 Turn off the LOR control panel or change network preferences to not have any DMX or E1.31 Link to comment Share on other sites More sharing options...
Ron Boyd Posted November 2, 2013 Share Posted November 2, 2013 You can also "unload LOR" from the task bar and that will turn it off. It should stay off until you select the Control Panel again. Link to comment Share on other sites More sharing options...
steve synek Posted November 2, 2013 Author Share Posted November 2, 2013 Thanks guys I just selected none for the dongle in the dmx preferences............that did the trick. Now I will just have to reset my network preferences when I am ready to turn on the show. Steve Link to comment Share on other sites More sharing options...
JLewinski Posted November 18, 2013 Share Posted November 18, 2013 You can also "unload LOR" from the task bar and that will turn it off. It should stay off until you select the Control Panel again.You would really be better off by following Ron Boyd's advice. Right-click on the blue lightbulb, and select "Unload LOR". This way, there is no need to mess with your network settings. Link to comment Share on other sites More sharing options...
Recommended Posts