Jump to content
Light-O-Rama Forums
Discotech24

DMX Questions

Recommended Posts

I am trying to use some of the Macros built in to the CMB controller but can't seem to get hem to work....I can get it to work in the hardware utility but how do I program my channels in the sequence to do the same thing......hardware utility uses 0-100 slider but when I use DMX edit in sequencing software it gives number values up to 255. HELP! Halloween is getting close. Thanks

Share this post


Link to post
Share on other sites

Macros?  The CMB DC controller cards don't have built in macros.  Maybe you are referring to something else.  Can you explain exactly what you are trying to do.

Share this post


Link to post
Share on other sites

Using your hardware utility, connect one CCB and see if it's configured properly and has the Macro Channels enabled.

They might be turned off.

 

Also, the HU can do either 0-100% or 0-255; check the option box on the bottom.

  • Like 1

Share this post


Link to post
Share on other sites

Checked Config and it is set for both Macro and RGB. Thanks for tip about 0-100 or 0-255, never noticed before.

Share this post


Link to post
Share on other sites

Checked Config and it is set for both Macro and RGB. Thanks for tip about 0-100 or 0-255, never noticed before.

 

See the CCB manual and use the Hardware Utility to access the last ten channels, which are the macro channels.

 

Playing with those should get you what you want.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...