zman Posted December 26, 2012 Share Posted December 26, 2012 I had not posted this earlier, but with 3.9, when the hardware is searching for controllers, not all of them are found. They work in the show, have a solid led, but they are not seen in the HE. Makes it difficult to troubleshoot on those controllers.This was not happening in 3.8 this season before I upgraded. The same 2 controllers are consistently not found (26 & 27) Link to comment Share on other sites More sharing options...
plasmadrive Posted December 26, 2012 Share Posted December 26, 2012 I have all mine connected via ELLs and sometimes the HWU finds one more controller then is actually there.. I have 3.9 software version as well. Link to comment Share on other sites More sharing options...
De Trommelslager Posted December 26, 2012 Share Posted December 26, 2012 I'm running 3.9.0 on my laptop and noticed the same thing. A second refresh found the missing controllers. Link to comment Share on other sites More sharing options...
zman Posted December 26, 2012 Author Share Posted December 26, 2012 I too have about 5 ELLs I am using, then in turn there is cat5 between a cluster of controllers.I have run a second refresh and it still does not see the missing controllers. Link to comment Share on other sites More sharing options...
Recommended Posts