Chino Lights Posted December 6, 2012 Share Posted December 6, 2012 I have three controllers but I think that LOR is only detecting one. It seems as if my 48 channels are running as 16. I do not know how to assign 3 controllers, etc. When I refresh it finds one controller. My lap top is connected to one controller and then that controller to the second controller and then that controller to the third controller. Seems right to me. When I test the system, it runs through all of the channels individually, so I am not sure what is wrong. I never figured out how to assign them. Is that the problem? Link to comment Share on other sites More sharing options...
CLD Kevin Posted December 6, 2012 Share Posted December 6, 2012 (edited) You need to connect to each controller one at a time and assign a different unit ID for each. You do this in the Hardware Utility. Edited December 6, 2012 by CLD Kevin Link to comment Share on other sites More sharing options...
Chino Lights Posted December 6, 2012 Author Share Posted December 6, 2012 Thank you VERY much. Something so simple is just not common sense (for me anyway). Thanks again I truly appreciate it. p.s. my name is Kevin too. I am in Chino (as you may have guessed). Link to comment Share on other sites More sharing options...
Recommended Posts