Jump to content
Light-O-Rama Forums
Sign in to follow this  
Guest guest

Quick disconnect crimp lugs

Recommended Posts

Guest guest

In anticipation of receiving the CTB16PC kit controller I was wondering where there is a good source for female Quick disconnect crimp lugs to be used on the cord sets I’m going to make for this controller. Will this work? crimp disconnect I will be using SPT2 type wire 16 gage.

Share this post


Link to post
Share on other sites
Guest guest

Ray, I think they will. Just make sure you get both male and female ends to have coupled connection. One thing to keep in mind is after several uses, they may loosen up (the female ends) but pliers squeezing them back down would probably do the trick.

Good idea :].

Tom

Share this post


Link to post
Share on other sites
Guest guest

What Controller 16PC Kit did you buy?
I bought the one with the board already soldered, plastic enclosure box and all the leads.
If this is the kit you are getting, then the cords already have the female spade terminals on them.
Al Terry

Share this post


Link to post
Share on other sites
Guest guest

This is the Kit I ordered > CTB16PC I will be making my own cords for this, I already have the wire and receptacle's, and the enclosures, I just need the Female Quick disconnect terminals. something like this >

prx528077b.jpg

Here are the ones I made Last year, Just a little different.

> My photo page

Share this post


Link to post
Share on other sites
Guest guest

I enjoy seeing people build their own controllers! (reminds me of me:))

The connectors you showed did not give the width (that I saw) They look like they are 1/4 inch (which is the size used) But they could be 3/16... If you give them a call they should be able to tell you.

Share this post


Link to post
Share on other sites
Guest guest

The ones from allelectronics are the ones I used. They work great (they are 1/4").

Share this post


Link to post
Share on other sites

wirekat wrote:

The ones from allelectronics are the ones I used. They work great (they are 1/4").

 


Purchased mine from Home Depot. 100 in box for $6.00. These worked better than any other that I tried.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...