Jump to content
Light-O-Rama Forums

Open Of Serial Port Has Failed Error (8002)


PaulXmas

Recommended Posts

lorerror.jpg

I am getting this error on both my computers.

The hardware Utility picks up the controllers but when I try to enable the schedule I get the error.

Nothing is running except LOR.

Again this is happening on both my machines and the show machine ran last Christmas.

post-3782-0-26947000-1342923842_thumb.jp

Link to comment
Share on other sites

I did search the error before posting.

I am able to control the lights via the HU.

Device manager shows nothing wrong.

Everything worked last year.

I have tried 2 different USB adapters.

The error OPEN COMX is always one number higher than the com port that is assigned to the USB adapter.

The screen shot is the error I get when the USB adapter is on Com 6.

Link to comment
Share on other sites

Did You check your network preferences in SE.

It should match your HU settings for each USB Dongle.

Link to comment
Share on other sites

there is only one on the laptop for testing.

so thats not it.

Link to comment
Share on other sites

there is only one on the laptop for testing.

so thats not it.

Sorry, it is the comm port number you need to verify in SE.

Link to comment
Share on other sites

Sorry, it is the comm port number you need to verify in SE.

I am at work so I can't check. But when you say SE is that the Squence Editor?

Link to comment
Share on other sites

Well I was able get things working on another laptop so the hardward is fine.

May have to do a reinstall of the software???

I don't understand why everything was fine at Christmas and now I can't do anything.

Link to comment
Share on other sites

Well I was able get things working on another laptop so the hardward is fine.

May have to do a reinstall of the software???

I don't understand why everything was fine at Christmas and now I can't do anything.

I don't know your computer abilities so please don't take this as an insult. On the two machines that are not working, are you sure that nothing else is using the comport that you are trying to use. For instance, is your HU closed before trying to enable your shows?

Link to comment
Share on other sites

Not insulted.

I do work in the IT field.

The error is referncing one com port (assuming COMx is referncing a comport) higher than the com port that is assigned to the usb adapter.

For example the screen shot is where the USB adapter is com 6 (error COM7) when I add a second usb adapter the error will be COM8.

I was testing some used ribbons I got and was worried that they were faulty but they worked fine on the XP machine with a new install.

MCITP Win Server 2008 R2

MCITP Win 7

MCP

and so on bla bla bla

Link to comment
Share on other sites

In the Sequence Editor have you verified the correct com port is selected?

Load SE, open a file, then go to Edit>NetWork Preferences. Check that only the one comm port is setup (Comm 6) and know others in the Regular network.

If you are setup for DMX only then make sure you do not have all the LOR Comm ports to "None".

Check also the DMX setting that the correct USB ID is selected for the USB Dongle you are using.

  • Like 1
Link to comment
Share on other sites

Ok will try that tonight.

Glad this isn't end of Nov or I would be in big time panic mode!

:)

Link to comment
Share on other sites

If you are setup for DMX only then make sure you do not have all the LOR Comm ports to "None".

This should read:

If you are setup for DMX only then make sure you have all the LOR Comm ports to "None".

Sorry for the typo.

Link to comment
Share on other sites

I checked SE and it was missing AUX A or it was set to none.

I set the other 3 to none and changed the regular network to the current com port the usb com port.

No error.

Issue resolved!

Tanks!

░░░░░░███████ ]▄▄▄▄▄▄▄▄▃

▂▄▅█████████▅▄▃▂

I███████████████████].

◥⊙▲⊙▲⊙▲⊙▲⊙▲⊙▲⊙◤

Tanks a LOT!

Edited by PaulXmas
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...