Jump to content
Light-O-Rama Forums
Sign in to follow this  
Snow

CTB16PC outputs

Recommended Posts

I have just started to assemble my 3 new controlers and I have realisd the following problem. I want to make some leaping arches, now each string of led lights that im using are rated at 24VAC. The CTB16 outpouts are 240VAC. Can I modify the channel output by using a 2.2K 20W resister in order to drop the output voltage to 24VAC or do I have to buy individual transformers for each string of Leds.

Is there a 16 channel controller with 24VAC outputs?

Many thanks in advance. I hope that everyone that came and saw your light displays were thrilled.

Snow

Share this post


Link to post
Share on other sites

If the strings will run on 24VDC, you can use a CMB16QC controller, with a 24VDC power supply.

Or, you can supply 240VAC to the right side, (9-16) so that the logic is powered up, then change the cord ends on the left side, (1-8) and feed it 24VAC, which it will correctly switch for the 24VAC load.

Share this post


Link to post
Share on other sites
Guest guest

GoofyGuy wrote:

wait 24 volts alternating current?

Note his location...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...