ccr config/ superstar program

[SFC SKI]

I can not configure my CCRs because I programed all my lights prior to the upgrades and I dont speak hex. In my layout I used a separate channel for each of my CCRs. I also split the arches and the 12 CCR tree across four LOR controllers. This begins my trouble.

CCR arch 1 LOR Controller 3 plug 5

CCR arch 2 LOR controller 3 Plug 6

CCR arch 3 LOR Controller 3 Plug 7

CCR arch 4 LOR controller 3 plug 8

--------------------------------------------------

For the big tree I used leg 1-4 on controller 6 and plug 13-16

leg 5-8 on controller 7 and plug 1-4

leg 9-12 on contoller 8 and plug 1-4

-----------------------------------------------------------------------------

So how would I set up my networks to handle this split or do I need to change all my songs?

Is there anyone out there who can walk me through this????

Presently my ccr (I have one conected to test) flashes with the mini trees and not at a subsquence at my first arch.

[Don]

I'm not sure what you are trying to do here .. but can we please refrain from posting the same question multiple times in multiple sections?

Is this question *directly* related to the SuperStar Sequence Editor, or a general sequence configuration?

[Dennis Cherry]

SFC SKI wrote:

I can not configure my CCRs because I programed all my lights prior to the upgrades and I dont speak hex. In my layout I used a separate channel for each of my CCRs. I also split the arches and the 12 CCR tree across four LOR controllers. This begins my trouble.

CCR arch 1 LOR Controller 3 plug 5

CCR arch 2 LOR controller 3 Plug 6

CCR arch 3 LOR Controller 3 Plug 7

CCR arch 4 LOR controller 3 plug 8

--------------------------------------------------

For the big tree I used leg 1-4 on controller 6 and plug 13-16

leg 5-8 on controller 7 and plug 1-4

leg 9-12 on contoller 8 and plug 1-4

-----------------------------------------------------------------------------

So how would I set up my networks to handle this split or do I need to change all my songs?

Is there anyone out there who can walk me through this????

Presently my ccr (I have one conected to test) flashes with the mini trees and not at a subsquence at my first arch.

If you are plugging the CCR controllers into the Channels plugs on another controller they do not work that way.

Please go back and read the manual on connecting the CCR controllers on the network.

Each CCR has to have its own controller ID just like the other LOR controllers do.