Jump to content
Light-O-Rama Forums
Sign in to follow this  
LightORamaDan

Take care when purchasing used LOR equipment…

Recommended Posts

NOTE: LOR allows customers to sell/swap LOR equipment on these forums BUT and/all transactions are between the buyer and seller. If there is a dispute between the buyer and seller they can post this dispute to protect others that purchase and/or sell HOWEVER I ask that others, not involved with the purchase, not post in said threads... This allows feedback to be by those involved. If you think that someone is being unfair or "STUPID" about things then please send a PM to me or LORADMIN.


In general there will be no issues purchasing used LOR equipment. However LOR sells controllers in various form factors (kits, partially assembled, fully assembled) and you must make sure you are getting what you are expecting.

In many cases people will describe the specs of the card being sold regardless of how or if it is wired. For example, someone may have a CTB16D for sale and advertise it as a 40 amp controller. If just the card with heat sink is sold then no issue but if the controller is pre-wired, it may not be wired to handle the full 40 amp load. In other cases people who received a kit soldered together by an amateur thought they were purchasing a LOR assembled product... not good!

THINGS TO ASK WHEN PURCHASING USED LOR EQUIPMENT (this info should also be included in the description but if it is not in the description then ask).

1. Was the unit completely assembled/wired by LOR. Either a LORxxx unit or a CTB16PC-ReadyToGO…

2. if the unit was NOT completely assembled by LOR, was it a solder kit or pre-soldered by LOR

3. If the unit was wired by the seller, did they use LOR supplied wires and if not then what type/size wires are they

4. does the card have heat sinks installed

5. if soldered by the seller what level of experience is involved. I would ask for a closeup photo of the backside of the card.

Dan

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×