coronabob Posted January 2, 2011 Share Posted January 2, 2011 I have been experimenting with a simple chase in a sequence. Everything works well with macros, except that channel one comes on for about one second at the end. Chase ends, then channel one on and then goes off.Any ideas why these pixels come on ? Link to comment Share on other sites More sharing options...
ItsMeBobO Posted January 2, 2011 Share Posted January 2, 2011 Your color selection extends past the macro settings.When there are no macro commands found, the ccr is in normal mode displaying according to the resolution. If you are using resolution 1 the entire ribbon will come on. If its 50 only the first pixel will be on. Link to comment Share on other sites More sharing options...
coronabob Posted January 2, 2011 Author Share Posted January 2, 2011 I tried deleting the color for 3 tenths prior to end. It still comes, the sequence of rgbs stops early of course, but then the first comes on and then goes out.I thought the same thing, but it didn't help. Link to comment Share on other sites More sharing options...
ItsMeBobO Posted January 2, 2011 Share Posted January 2, 2011 I will look at your test sequence if you want to post it. Have you tried MacroMaestro to see all the macro mode?? Click below. / Link to comment Share on other sites More sharing options...
coronabob Posted January 2, 2011 Author Share Posted January 2, 2011 I have it fixed, although not figured out. I made another new sequence and it works fine, so there is something in the sequence I can't see.As for Maestro, I did download it. It is awesome. Right now, just trying to learn the basics.Thanks for your help. Link to comment Share on other sites More sharing options...
Recommended Posts