Jump to content
Light-O-Rama Forums

randall

Members
  • Content Count

    120
  • Joined

  • Last visited

Everything posted by randall

  1. Thank you again. Will check the firm ware after work today. Purchased the mini director last year but hey you never know if it is current.
  2. Thank you for the quick repays. One other question, the manual says up to a 2 gig card would it be possible to use a bigger card? Have been to many stores and the smallest cards I have found are 4 gig cards..
  3. Will any sd card work or are they specially formated sd cards? Want to do a couple of different shows but don't want to have to keep loading it on to the sd card for different shows..
  4. I had a few props blow over last season, after standing them up a few times i put good old tent steaks in the ground and the hook over the edge of prop. They stayed up the rest of the season. As for my mini trees i just got some extra grey pvc cut it in half with a 45 deg. angle pound it in the ground, drill hole in top, spray paint black put the tree on it,run zip tie through tree and hole to secure to pvc, good benefit to this is there not on the ground getting wet or buried in the snow. we can get a lot of snow in ny...
  5. Thank you for all the help. Computer crashed again so just went and bought a new one. Back on track now. little less money in pocket, but the show will go on now. Took a while to get all the files back in and where they belong, but now tomorrow i will be able to start sequencing for this years show.
  6. Saved files to a usb card. Uninstalled lor files. Reinstalled download in previous from Don, my code does not support 3.5 so re uninstalled and went to 3.1.4 installed never asked for a folder to save files to. have all sequences on drive tried to move them to lor sequence folder but would not move them. any ideas where i am going wrong? Now when i go to put the license key in it is also asking for a registration key. Does this mean i need to re purchase a software to be able to use this?
  7. My computer crashed twice in one day. Was recovered with disk. Was trying to do some sequencing for my show. thought everything was all good, but didn't know that the files were being stored all over the computer. Have tried placing them all back in the lor folder but they just keep being sent to different folders in my computer. Have no clue where to go from here. Still need to do more sequencing but don't want to waste time if they will not load to my sd card either. Any info or ideas would be helpful.. Tried to reboot lor software 2 but says i have a newer version than the disk i received. The only other option that i can think of is to erase the lor file in my computer and start all over losing all the programming i have done, or buy a new computer and just start all over from scratch.
  8. COOL SNOWMAN. BEEN TRYING TO FIND A SINGING SNOW MAN FOR OUR DISPLAY. NO LUCK YET. ANY CHANCE YOU COULD PM ME WITH SOME PICS OF YOUR SNOWMAN IN THE DAYTIME TO SEE HOW YOUR FRAMING IS DONE? RRANDALL5563@YAHOO.COM
  9. VERY COOL. COULD YOU PM ME WITH THE SEQUENCE ALSO? RRANDALL5563@YAHOO.COM
  10. NICE JOB ON THE KORN. WOULD LIKE TO GET A COPY OF THE SEQUENCE IF YOU WOULD BE SO KIND. THANK YOU, ROB
  11. Thank you. That worked. Now just have to make note of this in my note book I have started for this. Been taking lots of notes trying to keep all this info jotted down till I memorize it all. There is more to getting started than I thought there would be.
  12. Ok so i have done all my sequencing. Went to show builder to load the sequences to the card and there were none of the sequences that I did in that list. Where or what am I doing wrong here. 1st year at this not sure what I am doing wrong here.
  13. Thank you for all the useful info. Would rather be safe to start off than so be sorry later.
  14. Only running 7000 mini lights across 4 controllers. The most on one channel is 400 icicles 4 strands of 100.
  15. Was wondering what the amperage on the power cords going to the controllers has to be. The controllers are 30 amps 2 cords at 15 amps each. The cheap orange extension cords are only 10 amps. Would this be ok to run or should I look for cords that are 15 amp rated.
  16. randall

    triacs

    i think someone went a little overbord on the cooling. in my opinion why didnt you just mount them in a box with a air conditioner.
  17. randall

    triacs

    Thankyou. Yes, heat sinks bolt on nicely. Using larger heatsinks than provided though. Have 4 of these bords that I am mounting in a. Transparent computer tower. I will post pics when project is completed. Thanks again.
  18. randall

    triacs

    assembled first kit today. then noticed i didnt push the triacs all the way down on one side. will this be a mistake later? have not powered on yet..
×
×
  • Create New...