Jump to content
Light-O-Rama Forums

Denis Chaput

  • Content Count

  • Joined

  • Last visited

Everything posted by Denis Chaput

  1. I have five LOR CTB16PC for sale all have heatsinks and where assembled by LOR 2- New still in boxes never used 2-used but excellent condition 1- used has B.O Ethernet Port I can provide pictures of all controllers Asking $450 + shipping from Canada. Will accept Paypal .
  2. Sent you wrong email for this can you resend please to Chaput_denis@yahoo.com Thank you Denis
  3. Hello James May I get a copy of this please? Chaput_denis@yahoo.com Thank you
  4. Would also like a copy if you are still sharing. Thank you Chaput_denis@yahoo.com
  5. James Looking for a few Pixel tree sequence if you don't mind sharing. Chaput_denis@yahoo.com Thank you
  6. Also running Windows 8 with no issues
  7. Same here ran last night was -37C and no issues also with 24 inches of snow covering all boxes which may help insulating them but no issues with cold for the last six years running LOR hardware.
  8. Connected the 485 to box LOR #4 and it's was detected and the 485 didn't overheat. Does everything work fine after you resoldered the diodes, if so looks like you may of had a defective USB485.Have you tried to put your spare 485 back on your show computer to see if all is well
  9. Don't forget that when you make purchases from the U.S shipping fees and duties almost cancel out your savings . Be prepared and check unless you have friends in the U.S you plan on visiting then get it shipped there then you can pick it up with great savings. Yes the quality and brightness of the lights from these vendors are much better than what you can find here in the great white north.
  10. I do not see red bulb in hidden tray on right only blue bulb in system tray. Does anyone have a solution
  11. I understand his problem : In the order yhst-1552586516070-45110 of pouney91 (Mr GAZON Yves) there were missing parts (I wrote a ticket about it in the help desk) Thank you Christian As we can see Christian has found his problem
  12. Allo Bonjour Est ce que tu regarde pour detection des marque du temps automatique. en utilisant le beat detector. I believe he is looking for automatic timing marks using the beat detector.Canadian french and France french a little different but we can help each other out. Maybe we can get I belive his name is miaskiewicz christian who is from France as I don't see the members list anymore
  13. Ed Have you thought of using C7 covers and do you think they will fit the same as the C9's?
  14. Thanks Guys Did a reset again nothing happened,found the proper firmware for this version of PC controller CTB16PC-V2 download to controller everything came up fine. Your help was greatly appreciated!!
  15. When my PC-16 controller is hooked up to computer, light is flashing slow no changes to light flashing when connected to computer or not.When I refresh the hardware utility I get 01-BOOTLOADER-PC-V2 for unit and status light still flashing,I cannot change the unit I.D.. This a new unit purchased last year never used.
  16. Sale cancelled due to lack of interest Just Kidding No emails yet should be soon patience:)
  17. LightORamaDan wrote: Wouldn't it be safer for an unsuspecting customer if there was an etch similar to the "Alex" that indicated it was a kit from the factory? Jeff Last edited on Tue Feb 21st, 2012 3:55 pm by Jeff Millard That is a good idea... I have held off on providing kits for the Gen3 cards but will be adding kits for the older cards back to the store. One of the issues with the Gen3 kits is that we want to sell them with the surface mount parts already installed. But without the some of the thru hole parts it would be fairly difficult and time consuming to test the surface mount parts. Once we get that flushed out we will include Gen3 kits in the store with some type of kit indicator... (I like it). Dan Colored boards?
  • Create New...