Jump to content
Light-O-Rama Forums

Val Bennett

  • Content Count

  • Joined

  • Last visited

Community Reputation

2 Neutral

About Val Bennett

  • Rank

Profile Information

  • Location
    Tremonton, Utah
  • Occupation

More About Me

  • Interests
    Pickleball, RC airplanes, piano/keyboard
  • Favorite Decorating Holiday?
    Christmas, but Halloween would be fun

LOR Software

  • LOR Software Version
  • License Level

Recent Profile Visitors

387 profile views
  1. Cdanna77 - That's interesting, I just double checked the troubleshooting guide that DevMike posted on this forum (see page 1) and it says 4.3.14 or higher, same with the checklist I got from LOR tech support and have seen on another forum. I wonder if there are two versions of the troubleshooting guide floating around, or maybe one was a typo error? In any case, sounds like we better stick to the latest software. It is encouraging that you like the PixCon16. Can you use the PixCon with xlights?
  2. Ditto here - including SantaLudy. Just in case anyone else out there has this problem, updating to version 4.3.26 from 4.3.24 solved the problem for me as well. I am also in favor of a re-write of the instructions to clarify this, or point out some other unknown related issue we missed.
  3. After being inspired by SantaLudy, I dug up my old laptop out of my wife's craft room and got the exact same result! I connected thru the LOR Network Configuration with no problems at all. Furthermore, I didn't even turn off my antivirus software. This older laptop is running Windows 7 Home Premium, while the newer laptop and desktop I couldn't get to communicate with the PixCon are running Windows 7 Pro and Windows 10 respectively. I wonder if that has anything to do with it? I went deeper into the Windows Firewall settings and there was no difference between the old laptop and the new. I may have to negotiate with my wife to use the old laptop this year for the show until I get the new laptop to work. I hope we can eventually solve this.
  4. Update for my issues - for what it's worth - I used Mike's troubleshooting document and did two things I hadn't done before, namely step 3 (setting the firewall to allow LOR thru); and resetting the computer when the document said to. All of the other items in the troubleshooting guide I had done previously. I also had an IT professional come look at my setup, he said I had done everything right. But we still couldn't get the LOR Network Configuration to find the PixCon16. All status lights on the board and ethernet cable were correct. Then we tried another brand controller he had and was able to use xLights to control it just fine (didn't have time to try his controller with LOR software). LOR is my preferred platform for playing shows, so I need to get this fixed! Or else buy a Falcon controller to use with LOR, and return the PixCon16.
  5. I am having the exact same problem. Read and followed all documents at least three times, watched a dozen instructional videos about networking (very informative). I also have a stand alone computer and network, no wireless, only one PixCon16. I have tried connecting with and without a router. After a few back-and-forths with tech support, it was suggested that my board might be bad so LOR sent me a new card (thanks Mike or whomever sent it). Unfortunately the replacement card also cannot be seen by the LOR software, so I am in the same position as SantaLudy. I'm having a hard time imagining that both boards would be bad, so I'm thinking there must be a setting on my computers I don't know about. I have also tried on both my laptop and desktop PC with the same result. So I will keep searching for a cause and educating myself, while watching to see if Jerry (SantaLudy) comes up with a fix. I am also planning to hire an IT guy to see if he can figure it out - will let you know if I come up with anything.
  6. Thanks to Matt who found that one of my RGB channels was inadvertently defined as a subsequence instead of an LOR channel. If anyone is having this same problem, you can check for this anomaly first. I just don't know how he found it so fast!
  7. I just began using S5, trying to open an S4 sequence. I get an "Unhandled exception" and "Device type sequence is not supported" error (see attached). The program gets hung-up then I have to shut it down in the Task Manager. Anyone run into this problem? Val
  8. After you have done a "save intensity files" in the PE, and save the file in the PE (not sure you need to do this step), then re-open it in SE. You should see the intensity files below all your SE channels. You then have to set your "Network Preferences" such that the networks your PE lights (intensity files) are using to "Enhanced". It appears to be working for me so far . . .
  9. Jim, I just checked and they were not. I didn't think this would need to be done for the visualizer, only to control the actual lights. It looks like it is working now. Thanks for the help!
  10. I have created a sequence using both SE and PE, and saved intensity files. When I open the SE, I can see the intensity files at the bottom of my SE channels. But when I play the sequence I can only see the stuff that was sequenced using SE on the visualizer. I also had the same RGB channels programmed in SE as PE, so I deleted them just to see if they were over-riding the intensity files created by the PE. Still can't see the intensity file lights on the visualizer. Anybody know what I am doing wrong? Thanks
  11. I am just learning Pixel Editor, creating a snowflake effect. I have a pixel matrix of 32 wide x 25 high. Can't figure out how to get the snowflake size down to just one pixel. I have it set on the smallest snowflake type, but it won't go below two pixels wide. Is there another place to adjust this?
  12. I am trying to determine if we need to upgrade from "Advanced" to "Pro" level when I upgrade to S4. We currently have a little less than 6000 channels, may get 12 more CCR's and make it closer to 8000. I would definitely add a network or two for the CCR tree, but not sure how much of an advantage the "Enhanced Protocol" is in the Pro level. Any advice? Thanks
  13. What firmware do you have on your CCR controllers? I have heard that when going to 500K, the latest firmware needs to be installed.
  14. Brian, what is the earliest release that I will see the "export macro channels" option in the Configuration box? I don't see it, I am running 24 CCR V 3.12.2. I would like to export without the macros. Maybe it's time to get a revision? Thanks
  15. I would also like a copy of the .lee file for the 8-channel trees. Thank you very much! vbennettz@frontiernet.net
  • Create New...