Jump to content
Light-O-Rama Forums

MikeA

Members
  • Content Count

    419
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by MikeA

  1. IT WORKED!!! The speed setting was the problem. Thank you everyone for your help!!
  2. Jim, I was set at 57.6K. I probably should run 500k with the CCR tree and I have the RS435HS adapter. It will be next week before I can plug back in and test since I just took my setup down for a party (my 50th) I hope it is a simple as this. Thank you for the tip!!
  3. I don't know. How do I check this? This is my first year using CCR's. You might be onto something. Let me know how to check this if you can.
  4. Oh, no, sorry. I do not have one of those. I ran a show because someone said it takes less memory for the computer to run a show than running the sequence editor.
  5. I have tested running the sequence from both the sequence editor and show director.
  6. I am only testing a 16 string CCR tree. Nothing else The guy who sold me the sequences said he has setup many Pixi 16 with DMX. He claims my controller is not configured right. This is where I got them. https://www.holidaysequences.com/
  7. It's the RS485 HS (red) adapter. Pixi16 controller on LOR network. What screenshot would help? Someone suggested I should run this on a DMX universe but I have no idea how to do that. I just updated the firmware on the controller and it did not help.
  8. Well $600 in a new computer did NOT fix this. I turned off windows search, nothing. I am running a Pixi 16 controller on LOR network. Any suggestions as to what to do next?
  9. This is my first year using 4.0. My show on demand is greyed out and not clickable. How do I turn it on?
  10. Thanks everyone. I am going to get a new laptop with windows 10 and 8GB memory. I am tired of messing with this POS.
  11. When I run a sequence not controlling the lights it runs through the sequencer fine. When I plug in my 16 string CCR tree it runs the lights slow. The song plays fine and will end and the lights will keep running for 30 seconds or so. Using windows Vista, 4gb RAM. Does anyone have any suggestions?
  12. I did not see it, checked junk. Could you try again?
  13. Can I get the LMS file for the tree? tigermike82@hotmail.com
  14. Do you have this for a 16 string CCR tree?
  15. That's because you are using 4.3.36 which requires firmware 1.04. I am using 4.3.18. Anything after 4.3.34 requires the new 1.04 firmware. Learning as we are going. Yes, they are working and I am happy.
  16. Problem solved. It must have been loaded from the factory with the newest firmware 1.04. I am using 4.3.18 by your recommendation and it needed older firmware 1.03. Thank you for responding. Go Chiefs!!
  17. Nope, still found "1 unit, 30 - Unknown Device ??"
  18. Ummm...I was experiencing problems It won't recognize the unit as a pixi 16
  19. I did all dip's in off, I also updated the firmware
  20. I am stuck at step 12 it found the unit, I changed it to #30 and it says "Unknown Device" How do I make it know it's a pixi 16?
  21. I do not use SS yet. I don't want the learning curve right now. Maybe next year but this year getting the 16 CCR's running is all I can handle. That and completely changing my layout to accommodate the 16 CCR tree.
  22. I have a 16 CCR tree I want to set up for Halloween with just scary images and such to play on a loop with no music. Does anyone have something like this?
  23. I know but this computer is not online and has been running my lights for 10 years.
×
×
  • Create New...