Jump to content
Light-O-Rama Forums

Wynell Lewis

Members
  • Content Count

    60
  • Joined

  • Last visited

Everything posted by Wynell Lewis

  1. I would like a copy of Happy. Thanks in advance. wlewis1@btconline.net
  2. I would like to see your sequences. Thanks for sharing. wlewis1@btconline.net
  3. I am having a problem with my controllers hanging on and randomly coming on. I checked the cat 5 cables and they are all ok. We are having ALOT of rain, I think it may be moisture in the controllers - I have them mounted on stands in the yard. The rain is suppose to move out tonight - what is the best way to dry out the controllers and will I have to reset them? Thanks.
  4. Last night when my show came on - the music played correctly but the lights did their own thing. Some would come on and stay on, others would flash to the music - it was crazy. Today I unplugged every power source and every CAT5 cable. Left them off for about 3 hours, plugged everything back up, tested and it seemed to work. Well, now it is doing the same thing again. I only have LED and incandescent lights on my controllers. Can someone tell me what I need to do? Thanks.
  5. Earle, I am planning to add a spiral tree this year. I wondered if you still share your sequences. Thanks
  6. I would appreciate a copy - wlewis1@btconline.net. Thanks.
  7. I would like a copy - wlewis1@btconline.net. Thanks.
  8. You are correct William. The car audio was ahead - and it was probably just a fraction ahead - but seemed like forever. Next time I will turn the speakers down. Thanks for the advice.
  9. Last year I used an EDM transmitter for my radio station. I also used an FM radio and speakers for people to listen to as they walked around the display. (We have a sleigh ride through our property, so most people get out of their automobile) If you were sitting in your auto listening to the radio and had your window down where you could also hear the speakers it was an echo effect - the timing was off by a second or so. Any ideas how to correct this? Thanks.
  10. It was the red light on the controller blinking, I changed the fuse and seems to have fixed the problem.
  11. Last night I tested my LOR and everything worked fine. Tonight my show would not work. I use the mp3show director, the red status light blinks constantly - what could be the cause?
  12. I forgot to mention -- it ran the Cat 5 cable, some of the controllers it got were not even plugged into the power outlet yet.
  13. I forgot to mention -- it ran the Cat 5 cable, some of the controllers it got were not even plugged into the power outlet yet.
  14. Does anyone use surge protectors on their controllers? We recently had an electrical storm that put 5 of my controllers out of service. I was wondering what type of surge protectors would work best?
  15. It is the controller that runs my mp3 (LOR1602MP3)So it is just connected to the other controllers.
  16. I read in the manual this means the controller is not connected to a LOR network or the network is not active. Well, I connected everything like I have in the past, so I am not sure what I need to do. Can someone please tell me what this means? Thanks.
  17. Thanks so much for you help. That fixed the problem. As always you guys on the forum are the best!!!
  18. The firmware version is 4.32. I am trying to test in hardware utility. When I plug the power in, the lights start coming off and on randomly, the only way to get them to go off is unplug them. Any suggestions what the problem may be? I have several other controllers and they have tested properly with the hardware utility.
  19. Any suggestions on how to put the transmitter outside? I tried putting it in a plastic box - that seemed to mess up the signal. My house is off the road about 250 feet, if I leave it on the porch, the signal at the road is not to good. Any ideas? This is a whole house transmitter. Thanks.
  20. I am having the same issue. Is there somewhere you can buy the resistors already made up?
  21. Hi, In the past I have used the hardware utility to create my shows and download to the SD card. This year I want to run an animation during my muscial show. How do I make this work? Thanks.
×
×
  • Create New...