Jump to content
Light-O-Rama Forums

mmkooiman67

Members
  • Content Count

    74
  • Joined

  • Last visited

Everything posted by mmkooiman67

  1. Do you have any songs in mind?
  2. Would love a copy also Sarge. mmkooiman67@aim.com Thanks in advance
  3. Thanks so much. Can't believe I missed that.
  4. Hello All, Just down loaded S3 ver. 3.9 on a new laptop. My problem is, when in the sequence editor, every time I press play all the icons gray out and I have to use the drop down menus to stop it. Any ideas, thanks in advance, Mark
  5. Would love a copy. Thanks for sharing! mmkooiman67@aim.com
  6. For some reason I cannot get the audio to download. Probably a windows 8 thing. Is that a modified version or can I purchase it on itunes? If its modified would love a copy. Thanks in advance, Mark mmkooiman67@aim.com
  7. Can you post a link to the Enttec Open you bought? Craig, Here is a link for the Enntec open. As far as the colors being off, I have found that a lot of the RGB stuff from China is wired incorrectly. http://www.enttec.com/index.php?main_menu=Products&pn=70303&show=description
  8. Channel assignments are right on. Already exported into excel and everything seemed to be good. And yes, line is terminated. Think I might try re-assigning the two controllers with a new address,hopefully that works. Thanks for the replies.
  9. Hello All, Before I start I want to say thanks in advance for all the help I am about to receive. 7th year with LOR, 1st year LOR with DMX. I have 30 of those 3-channel DMX controllers. 15 for the trim of the house and windows and 15 for coro stars I bought from David. My problem is 13 of the stars work perfectly but two, which are in the middle of the bunch, are in sync with the other 15 which are doing something different. I replaced the controllers with new ones, I checked the channel config and no overlaps or shared channels,replaced the cat5 cables and connectors, checked the programs and everything is as it should be. I am using an Enntec open so there is no channel +1 problem. I am at a loss. Any ideas? Mark
  10. I use duct tape but before I put it down I spray the sidewalk with 3m spray adhesive then put the tape down. Never comes up.
  11. I was having the same issue so I bought the latest LOR dongle and still was off by one channel. Bought an ENNtec open and the problem went away.
  12. Thats what I thought, Thanks
  13. Hello All, Quick question. I am running 30 of the Holiday Coro 3-channel controllers and I am daisy chaining them. Do I have to daisy chain them in the order of the set channels or can they skip around like 1-2-3, 10-11-12, 4-5-6 etc. Thanks in advance, Mark
  14. I bought four sets for $13 a piece with free shipping on Ebay. They are pretty cool.
  15. I also used Xlights after setting the start address and it showed correctly. Let say I set the starting address to be channels 4 thru 6. In Xlights I verified it and it worked fine. But when I hook it up to the LOR dongle and try it out it is working on channels 5 thru 7. I know this has been an issue with some people but what has got me bugged is that the +1 channel is only on half of my 30 dmx decoders, the other half stay with the programmed setting.
  16. Thanks for the responces. Enntec Pro it is. Don't have much confidence in the LOR dongle.
  17. Hello All, This is my 7th year with LOR but my first year with DMX. I bought 30 of those small 3 channel contollers to control a bunch of RGB strips. I used the Holiday Coro programmer to set the start addresses. I assembled all my control boxes(controller,power supply,etc). Now I am testing and I am having all kinds of issues. I have some controllers, but not all, that are flickering on fades, but not on solid colors. But my biggest quondry is some of the controllers I have to do a +1 on the start channel and others I don't. This wouldn't be a big deal but I have three controllers that are supposed to be channels 4-6, and one works like that and the other two are 5-7. I am using the LOR usb45 dongle and version 3.4. Any help would be greatly appreciated. Thanks in advance, Mark
  18. Sorry Don, Don't mean to offend but that just seemed like an aweful lot for the small package it will be. Anyway, love the products, very reliable and great customer service. Mark
  19. Hello All, Just got my email confirmation that my order from the sale shipped. I have ordered many times from them and they have the best product out there. The problem I have is I ordered one CTB16PC-KIT and one dongle and the shipping was $24 to California. Is it just me or is that a rediculous amount for shipping for such a small package? I would hate think that they have a sale but make the $ back on shipping. Just saying!
×
×
  • Create New...