Jump to content
Light-O-Rama Forums

SnappyTom

Members
  • Content Count

    217
  • Joined

  • Last visited

Everything posted by SnappyTom

  1. Haven't messed with CCRll much. So it worked like the none CCR sequences do. Thanks that worked great.
  2. I need to change the Network and Control #s to an existing sequence in SE. Do I have to change them individually (like 600 times) or is there a way to change one hole ribbon at a time?
  3. All is working now. Went with 2 networks. One for 5 controllers and one for Pixie 16 and one controller. Had to change 6 of the Channels So they are all on Aux A net work. Thanks for the help.
  4. Why Is the sup.lms sequence playing on the house and not the CCRll tree When in SE?
  5. Looking at network preference, says I only have one network. None under Aux. Still only 1/2 of the tree is displaying the sequence. The CCr1 controllers were split, 6 on one network and 6 on the aux network. Now that I have only one network it is only seeing 1/2 of the sequence. Humm In sure its something simple I am over looking.
  6. OK now lets see if I can remember how to change it. Thanks
  7. Last year the CCR 1s, I was using 2 networks. I had the 12 channels split. So now when I daisy chain Controller #5 to #6 the Pixie 16 there is no place to in the second network. Will I have to eliminate one? Only half of the CCR2 tree is working.
  8. I'm replacing my CCRl 12 channel tree(CTB16) with the CCRll only using 12 channels of the Pixie 16. I don't believe there are more then 100 on each ribbon. Just tried a test and it was ugly.
  9. Great! thanks Do you know What settings to put into the Pixie Config box?
  10. Thanks Mr P updated to 4.4.0 and it recognized the controller. Dibblerjr I tried to follow the sickie prior to updating. When I got to the part, selecting the Config button that was fine. When it said, push the ccr/pixie, it was not highlighted. Now that I updated it recognized the controller the ccr/pixie button is push able. Thank you both for the info and for helping so many of us. Im sure I will have more questions. I do have another question. I am currantley using 2 485Bs. One for the CTB16s and one for the CCR 1 I was using last year. Will I have to get one of the red USB485-HS? For the new Pixie 16 with CCR 2s After step 15, What is the model number of the new CCR lls? I believe they are 150 lights? I went to LOR web site and didn't find the info to put in the Pixie Config
  11. I changed the unit ID on my new controller no problem. When I hit the refresh button it says the correct unit ID but the device is unknown.
  12. I went with the new CCR lls with the new pixel controller for my CCR tree. What do I need to do to transfer from the old CCR1s to the new CCR lls? Is there a tutorial to show me how to go from old ones to new ones?
  13. Yes it is checked I am thinking the ribbons are bad.
  14. Ok had help and he figured it out. Yesterday I unplugged both 485s adapters to setup an ELL. When I plugged them back in I plugged them in the wrong 485. So the cat5 cables were backwards. Switched them back and all is well. Thanks to all
  15. I am having the same problem. It was working fine yesterday afternoon and when I turned the show on that evening sound with no lights. The only thing different yesterday was, trying to get a ELLs to work with no luck. LOR all the way. Is Listener suppost to say "(Sequence Editor) connection closed while reading msg header?
  16. If you need to use the bad box, now you know what one it is. You can put that box at the end of you daisy chain and it should work if you plug it into the working plug.
  17. The only thing I was doing with LOR yesterday afternoon was trying to get an EEL to work. After I can figure out why my lights are not working, EELs will be my next question.
  18. Yes LOR on my laptop. Yes the control panel is running with the Light bulb in the bottom right corner of screen. I right click the bulb to turn on sequence editor to try a test sequence and still sound with no lights.
  19. It was playing fine earlier but now, show will not play any lights. Went to hardware utility recognizes all the controllers and the red lights are on solid on all the controllers Went to Sequence editor and when playing a sequence I only get sound no lights.
  20. Any I ideas on why on my 12 CCR tree, the #1 row is staying on and 3 leds on the next row are staying on between sequences?
  21. Do you have One or two networks setup? Are all the lights on your controllers solid red?
×
×
  • Create New...