Jump to content
Light-O-Rama Forums

philw

Members
  • Content Count

    26
  • Joined

  • Last visited

Community Reputation

0 Neutral

About philw

  • Rank
    New Forum User

Profile Information

  • Gender
    Male
  • Location
    Australia
  • Occupation
    Garage

More About Me

  • How I learned about Light-O-Rama -
    google
  • Favorite Decorating Holiday?
    xmas

LOR Software

  • LOR Software Version
    5.2.4

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi Thanks will make one now, I take you just make the number of channel you want and just turn on/off/fade etc randomly to make a filler sequence.
  2. Hi If you have finished running your sequence show and just want to have your lights on randomly is there such a function with LOR Thanks
  3. Hi I have a sequence that lasts 2min 32sec, but my audio is 3min 41sec Question how do i extend the timing to 3min 41sec so i can match sequence and song length. Thanks
  4. Yes got it thanks. Any short cuts on how to make lights and music go well together !!
  5. I have worked out how to add rgb channels !! now just need to make some sequences, any short cuts to match lights with the music ??
  6. Hi All First thanks for all your help I jumped in the LOR party !! I now have purchased 2 x CTB16-PC and 2 x CMB24-D i have 20 x 240v strings and 240v motifs for my CTB16-PC, then 4 x floodlights and 12 dumb RGB led strip lights for my CMB24-D i have planned where my lights go, i thought that would be the hard part....but now the sequencing...where do i start..i have a few 32 channel sequences. i have had a play with the sequencing software, at the moment i have 32 channels set up for 2 controllers i am thinking these are for 2 CTB16-PC boxes, what is the best way to add the 2 CMB24-D boards into the sequences. i can see i have unit 1 channels 1-16 unit 2 channels 1-16. Question is do i just add another controller (device type light o rama) but is that 8 channels or 24 channels (because 8 rgb strips but 3 colors??) and i then try and match each channel to the music. Thanks in advance lightsetup.docx
  7. Hi All First thanks for all your help I jumped in the LOR party !! I now have purchased 2 x CTB16-PC and 2 x CMB24-D i have 20 x 240v strings and 240v motifs for my CTB16-PC, then 4 x floodlights and 12 dumb RGB led strip lights for my CMB24-D i have planned where my lights go, i thought that would be the hard part....but now the sequencing...where do i start..i have a few 32 channel sequences. i have had a play with the sequencing software, at the moment i have 32 channels set up for 2 controllers i am thinking these are for 2 CTB16-PC boxes, what is the best way to add the 2 CMB24-D boards into the sequences. i can see i have unit 1 channels 1-16 unit 2 channels 1-16. Question is do i just add another controller (device type light o rama) but is that 8 channels or 24 channels (because 8 rgb strips but 3 colors??) and i then try and match each channel to the music. Thanks in advance
  8. Hi so the CMD24D will only take 30v, so it can take 8 rgb dumb led strips but the specs are: Color RGB LED Quantity 300leds / 5M Protection Waterproof / Non Waterpro View angle 120° Working input Voltage 12VDC , ≥6A Working power 72W/5M Working Current / M 0.35-1.2A Working Temperature -20 to 50°C so that makes 8 x 12v (96v) so that is to much to go on board? can you get lower voltage rgb srtips? or does it mean max of 30v per rgb strip connected ?? Phil
  9. Hi..Sorry and thanks for all your help, i am just trying to make sure i get it right!! I have bought a lot of Dumb RGB lights strips, thats why i am going CMB24D (think thats right board for these lights they have 4 wires) I have some motifs, xmas trees, santas etc made from rope lights that are 240v with no functions (planning on these plugging into CTP16-PC) I have a lot of LED strings lights input 240v output 31v which plug directly into the main power but the plus is a multi function transformer plug. i can change these adaptor plugs to non mulit function (planning on these onto CMB24D) Does this seem all ok. One more question when i get sequence for the Dumb RGB strips will one strip be 3 channels of sequences so 8 strips on 1 CMB24D board needs 24 channels of sequencing (8 strips 3 colors per strip) Thank You again for your help Phil
  10. Hi still trying to get my display ready for this year (first attempt) all you expert helpers out there would this work lightsetup.docx
  11. yep sorry to confuse people i am going 1 x CTP16-PC to control my 240v plug in lights, A CMB24D to control 8 RGB dumb led light on a xmas tree (8 uprights pieces of timer to form a tree shape) a 1 more CMB24D to control some more Dumb RGB strips along roof line, around windows and a few RGB spot lights....does this sound workable. One more question when you wire a strip light on a CMB24D board does that give you 3 channels, 1 x red 1 x green and 1 x blue, then you put 8 strip lights on 1 CMB24D board so that is 24 channels, per board?
  12. philw

    sequence

    HI If i have a CTP16-Pc controller that give me 16 channels of 240v lights/motifs etc and 2 x CMB24D boards one CMB24D for a tree with 8 2m rgb led light strips (dumb) and CMB24D for rgb led strip along gutter libe and indow plus some spotlights, what channel sequence am i looking for, is that 64 channel. ?? Thanks
  13. Hi I am pretty sure they are dumb strip ($12 for 5 metres) and looking at pics they seem to look like dumb) i will look at rays..thx
  14. ok understanding a bit more now, most of the led spotlights over here or in china have 23 or 3 wires, struggling to find them
  15. so the spot lights need 4 wires same as dumb rgb led light strips??
×
×
  • Create New...