Jump to content
Light-O-Rama Forums


  • Content Count

  • Joined

  • Last visited

Community Reputation

1 Neutral

About pedalyurassoff1

  • Rank
    New Forum User

Profile Information

  • Location
  • Occupation
    electro-mechanical tech

More About Me

  • Favorite Decorating Holiday?

LOR Software

  • LOR Software Version
  • License Level

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. yup...that did it. it is working just fine again. THANK YOU SOOO MUCH!! I saved a screenshot of it all in my lor folder.
  2. this is how it is set up right now. I would have thought that the config in network preferences would say universe 1-16 like it does in the pixcon assistant? Also, I have a one universe one output program from Brian Bruderer that I used to run his military tribute which he made on the superstar, but sent to me to reconfigure to run his sequence on my light board. I haven't run it yet. I don't think I should, cause all of this worked before I added his sequences two years ago. Anyway, I still can do anything woth lor network preferences. I can go into that table and change every universe to 1-16, but I haven't done it yet. It does look like the universe set up going 1111, 2222 333 4444 and so on should be 1-16? and the channels should sequence from 1-2400? I am sooo confused right now. I have a router without wireless that i can plug in, and try going back to lor mode, but then I have to change jumpers on the pixcon 16...I shouldn't have to do this. Lor help desk hasn't gotten back to me as to why the board won't even self test correctly...
  3. it was set up multicast...with 16 universes, except that 1through 9 were ip adresses ending in .9 then universe 10 was the original .1 then 11- 13 were .11, .12, and 13. then 14 was .1 again. I went in and changed 10 from multicast to unicast, (All the others were multicast already) and all 16 lined up correctly, when i hit enter. I went back and changed 10 back to multicast, and everything stayed lined up correctly, and everything said multicast. I will have to power it up tomorrow to recheck the settings. I can only get into it using the pixcon assistant. I can't get into it yet using the LOR network settings. I'll keep trying. If you have any other tricks, please let me know, thanks!!
  4. I went to start up a show again this year, and all of a sudden, my board isn't right. It was showing some channels lit white (complete rows), but they were blinking from dbright to dim and 10htz. o.k. I ran the lor pixcon assistant, changed to ws2811/12. and now it stays off with no random pixels lit. I went into the network preferences, and it wanted to give the board a static ip, but failed. I went back to the pixcon assistant, and changed from dchp to static... went back to network preferences, and it forced it to I noticed on the dmx tab that universe 1-9 were in succession from to Universe 10 was then 11-13 were in succession to then 14 was the .1 again. then 15 and 16 were at .15 and .16, respectively. I changed universe 14 from multicast to specify, as it already had the proper ( address listed, and the rest that were 0.1 changed. So now I have all 16 universes set at through .16 When I changed universe 14 back to multicast, everything stayed in succession.. Good, right? Now, the pic I included shows what the display is doing in pixel editor with a red colorwash displayed. See how the channels seem to stop, and start the next channel where the last one finished? channel (universe) 1 is at the bottom. I am still stuck at your step 11...sort of. When I do the test, I have both solid lights. I hold the ip button for 3 secs, and it does a perfect test pattern...sort of. Every light is lit properly from red, to green, to blue, then white,...then it goes out, and both lights alternate flash for five secs, then they go steady, and the board stays dark. At least now it doesn't "freeze". so what the heck is causing the split pixels on the board during display, and why won't it stay in hardware test? I have always been able to use this at the beginning of every season to test if all the pixels are working. (had rabbits chew up some lower strings last winter...expensive) I'm guessing I've done something stupid, but something changed on it's own...weird after these years of just turning it on, and it working, (except for the wabbits). I am running version 4.4.4 pro, and my firmware is 1.4.8. The pic is what my board looks like now when I try to run a scrolling word sentence. It all looks great in pixel editor, but not outside.
  5. I love this! Can I get a copy? I also have several halloween sequences. I did Thriller with 32 channels, and 8 rgb channels. You are welcome to it. Pedalyurassoff@gmail.com
  6. I have Mary did you know, by Rascal Flats, and want to add my new 16ccb tree to the mix. Can I get this from you? the download link is set to private.
  7. I just got into the pixel thing , and bought a mega tree kit from Wowlights. The programming, and network setup were totally confusing, but now that everything is playing well together, it is AWESOME! I am in the process of adding the pixels to all of my existing sequences. Also, we can share sequences no matter what they are programmed for. Just keep a file of your channel configuration, and get ready to do a lot of cut/pasting. I can't upload any files here (too big), but I'll email them to you.
  8. As a former Marine, I want to thank you for your service to our country, and, of course, your efforts here. I would love this sequence, and anything else you want to share. In return, I offer sequences for Tobey Keith's American soldier,and The Stars and stripes forever, They are done with 32 regular channels, eight rgb channels, and a pixcon 16 horizontal matrix.
  9. I just got a 16 strand tree with cosmic color bulbs. If this will work with it, i'd love to have it for my light-o-rama controller...I think I need it as an lms file. where do I get the proper audio for it, and what is the song called? Thanks in advance!! pedalyurassoff@gmail.com
  10. really cool! Now I just have to find this sequence...or at least the audio.
  11. sorry, I got it from wowlights. But it is the pixcon 16, and 16 strands of ccrs.
  12. I am new here for pixels. Just bought a Mega Tree Kit from Light-o-rama. Took me about 10 hours of fiddling to get it to work on my network. Anyway, I thought for 1300 bucks, I should be able to turn it on its side as a horizontal matrix and use one string for the stars, two strings for the blue background, and thirteen strings for the stripes. i have a regular lor 16 channel flag set up now, with the same configuration with the 16 channel controllers. I was wondering if anyone has set a matrix up with the 16ccb mega-tree kit, and how they programmed it. I can't see any of the videos posted on links here. Don't know why.
  13. OMG!! I am overwhelmed. Trying to hook up my new mega tree kit to my existing lor network. I presently have two 16 channel controllers, and last year i went on too the cmd-24B for some rgb strips. I program my own sequences, but this mega tree is blowing my little mind. I think i want to run it in enhanced lor mode. I set the unit id to 4. I have it daisy chained into my lor network. I get nothing. BTW I have upgraded to s4 pro. I have looked everywhere, and it seems like there is a lot of help for e1.31, but I don't know which way to go, or how to get there . I have a router, and a switch, if needed. Any help on hooking this up and setting it up will be appreciated.
  • Create New...