Jump to content
Light-O-Rama Forums

mdnooyer

Members
  • Content Count

    94
  • Joined

  • Last visited

Everything posted by mdnooyer

  1. hi Dale, would you send me a copy? mdnooyer@zeelandnet.nl greetz, Mark
  2. sent a mail to mdnooyer@zeelandnet.nl and we can share some 16ccr sequences. Greetz, Mark
  3. Can you sent me a copy please? mdnooyer@zeelandnet.nl I'am just building a show with this number, now programming the 16 ccr tree. when it is ready i shall post it here. greetz, Mark
  4. i use 1 aplhapix 16 controller for the 16ccr tree and 1 dmx channel for the star. And use a network cable with a 100-1000 switch. when i put more on the controller or use a other netwerkswitch ive got a lag. It's looks to me as a lag, the controller don't recive his data fast enough, or it can be overload. You also can measure your 12v during the show, some times your adapter can't handle it. and you measure 11.2 v greetz, Mark
  5. have 5 alphapix 16 controllers works fine on S5. - Do you set the universe channels in LOR (netwerk controller)? - Works the alphapix in the demo mode? - do you see a ip adres on the alphapix display? Greetz, Mark
  6. I can't find what i do wrong. I made a 16 ccr tree (tree 90 with 50 leds and 16 strings) so far so good. When i use the motion effects it works fine with al the effects. But now the problem i have a lot off sequences made in LOR 4.3 when i open them i see o other tree. (one with 16 channels) The one i made in S5 have only 1 channel so i can't copy paste. Thanks, Mark
  7. When i made a new clipboard file in S5. It don't work when i select it and want to paste. Then i made a new one in S5.
  8. Hello, After a long search i found the problem but not the solution. When i use "Papagayo" with "Papagayo to LOR" and copy it to the clipboard from S5. So far so good, but what i do i can't paste it into a channel, Select the file in the clipboard from S5 (is not locked) and paste bij time but the channel will be empty. Today i install LOR 4.3... on a other computer and copy the file to the clipboard from LOR 4.3 Select the file paste it and it works. it paste al the channels and mouths from Papagayo What do i wrong or is this not possible in S5 anymore? Greetz, Mark
  9. Hello, I'am looking for this sequence for 16 ccr tree and if it is possible also for singing Christmas tree's. thanks, Mark
  10. Thanks i need them from the matrix, now i can drilling holes. Thanks
  11. could you send me a copy please ? mdnooyer@zeelandnet.nl thanks, Mark
  12. thank you very much. I also orderd 800 leds for the 16 x 50 pixel matrix. But do you have the distance between the leds? Send you some pictures when i'am ready. Mark
  13. Hello, I'am very busy to build a normal spinner and i already orderd the leds for your blade spinner. Would you like to send the test file from War? so i can look at the examples in SS and can program the bladespinner very vast. If i have to pay for it or we can trade some sequences thats not a problem. mdnooyer@zeelandnet.nl Thanks for showing your work, Mark
  14. Found it when i need to use the option horizontal-bottems or nested when i made a group. thanks, Mark
  15. Hello, Now i have the following problem, when i click on a box in SS it wil take 4-8 pixels in one time. I try to put a foto but i won't work. Try to give you a page with pictures. http://www.kerstlightshow.nl/program-the-spinner-with-ss/ (it is my own webpage i just started (1 day ago) to help people Thanks Mark
  16. Thanks Brian i found it. I had to close it and open it again now it wil load the right prop definition. now i can program it Thanks, Mark
  17. I have them i a group. But when i open it with SS it shows only the first one. I try to make them by using "prop definition" shap "advanced" en then i made a new one. The problem i than have is it looks like i can't draw with pixels only RGB. thanks, Mark
  18. Thanks Brian, But i stil have a problem, i made a spinner with 8 lines and a circle. I made a group of them but when i want to open it i only see the spinner or the circle in SS not both. thanks, Mark
  19. Hello, I build a spinner with a circle around it. Now i made it in S5 sequencer and save it as a group (.lpeprop) file How can i open this in superstar sequencer? I want to make some nice effects in superstart sequencer, but how i get the file into SS from S5 seq? greetz, Mark
  20. Thanks James, I spend some time to rebuild it, for my house. But is amazing, when it is ready i put it on a dropbox. Here is a preview from your sequence, i used S5 beta. youtube example Thanks again, Mark
  21. Hello, Can i have a copy to? i am searching for Thunderstruck for a frend off my. as a supprise because he is a big fan off them. mdnooyer@zeelandnet.nl Thanks, Mark
  22. problems with copying S 5.0.16 Desktop i7 windows 10 64 bits, Laptop i5 windows 10 64 bits. I make the sequences in S5 on my desktop with 2 screens. And have a laptop where I play them with S5. When I copy the sequences to the laptop, everything seems to work well. But he does not take over everything, then miss things. I also lost the 2nd and 3rd layer of my 16ccr tree. I have the same with more pixel strips where I used 2 layers or more. When I create playback files and play them with S4, I do not have that problem. I copy everything with that name to the laptop, or do I forget files that are somewhere else? gr, Mark
  23. I think the problem is i made them in S5 and then i create playback files. So i can play them on my laptop with S4, because i have some problems with S5 to play them 100%. I made it in S5 with the SS (in S5) make pictures from animated gifs. And place them as a picture in SS on the music, and there i think is the problem. Greetz, Mark
  24. Hi, I have a problem that I have not really found on the forum. When I use my old sequences with S4 I have beautiful full colors. Now I have used S5 and in the preview it looks nice. But in reality the colors are not so beautiful, yellow is more white. In short, my colors on my 16 ccr tree are white. I use S5 to make it, create playback files and play it with S4 Did this because I did not manage everything with S5. Now go and put the new S5 (5.0.16) on my laptop. I use my laptop to control the lighting. Make it on my desktop PC with 2 screens. Can I adjust the colors? I know that in the past the colors were changed if you made something in SS and made a sequence file of it. The colors seemed different in S4 than in SS but on the 16 ccr tree everything looked nice. greetz, Mark
×
×
  • Create New...