THAT-NEW-GUY

Or 24 to 22. Use a different cable as well Sent from my iPhone using Tapatalk

I'd connect 25 to 23. Sounds like 24 might have a bad connector Sent from my iPhone using Tapatalk

Are all the controllers seeing a dmx connection. Are the lights stolid or flashing after 24. Sent from my iPhone using Tapatalk

Comm listener running? Sent from my iPhone using Tapatalk

200 is my longest. F4v2 Sent from my iPhone using Tapatalk

I'm running 800 pixels at 11.8v no power injection on my tree 4 stings of 200. No issues at all. Sent from my iPhone using Tapatalk

Lower your power supply voltage. Try 11.5 should work Sent from my iPhone using Tapatalk

On the pixcon make sure the jumpers are set to LOR. It will still output dmx but it will use the LOR pinout. Dmx are pins 1-2 LOR uses 4-5. That's all those jumpers do. Nothing else is needed. When you connect the LOR boxes they will auto detect what protocol is being used. Red light on board should stay on solid. Might need a termination jumper but that's it. Sent from my iPhone using Tapatalk

. That should be your 24 ch controller. Sent from my iPhone using Tapatalk

PixelController.com Sent from my iPhone using Tapatalk

100 Sent from my iPhone using Tapatalk

These are my 4ft treeshttps://vimeo.com/183362113 Sent from my iPhone using Tapatalk

I bought one as well they work pretty good. Sent from my iPhone using Tapatalk

Did you click the act box? Sent from my iPhone using Tapatalk

Hahaha Sent from my iPhone using Tapatalk