Jump to content
Light-O-Rama Forums

Rusty

Members
  • Content Count

    22
  • Joined

  • Last visited

Everything posted by Rusty

  1. For now I only have one 28 x 28 matrix (7 strands of 112 pixels) and one 70 pixel mini tree connected using a Pixcon 16 and I'm getting some serious lag while sequencing and if I run a quick show. Not sure if this has anything to do with it but I'm using last years preview and some of last years sequences. I have been using LOR for at least seven years, maybe more. V5.3.6 PRO, ELOR, 1000K. Should I get with the Help Desk and update my Pixcons? I tried 500K, different versions of the Pixcon16, swapped USB to 485 connectors (THE RED ONE's), different CAT5 cables, switched between Primary and Auxiliary networks, etc. Any other suggestions would be greatly appreciated.
  2. New question. I'm trying to have an effect like fireworks or twinkle going on in the background with two single block effects going in opposite directions on my eaves. The problem is that the single block effect blends with the fireworks or twinkle effect as the single blocks travel across them. I used the left and right screens in motion effects to create the opposing single blocks and added a motion effect row for the fireworks or twinkle effect. Is there a way to keep these effects from blending?
  3. Never mind. The problem occurs when I try to have fireworks in there as well.
  4. Using the sequencer (S5) not superstar is it possible to apply more than two motion effects to a prop without the colors blending? Example, using the Ripple Effect (circle). Can you bring in four different colored circles from different corners of a matrix and have them NOT blend colors as they cross each other.
  5. Beta 5.3.0 is not good. It looks like something designed for a child, with the bigger buttons on the tool bar. I also don't like the little screen on the right side. I like to have as much visible programming area as possible. The tool bar was just fine the way it was. Please stop changing things like the toolbar and make better effects. How can I undo the Beta install?
  6. Thanks for the suggestions.
  7. I've been using LOR for 6 years and never used Super Star. I have v5.2.2 Pro and 4CCR Super Star. I would like to scroll objects (Sleigh, bells, elves) across 5 of my matrixes each of which have 792 pixels or 2376 channels for a total of 11,880 channels. Is Super Star the only way to do this and if so would I need to upgrade to the 4_CCR to 80_CCR (+450.00) due to channel count? Geez that's expensive!!!!
  8. Figured it out. Won't work at 1000k.
  9. Pretty sure that's what I'm doing. I'm using the "Add a Light-O-Rama device(AC controller, Cosmic, Pixie, Pixcon, Flood, Etc)" tab. So it basically sets it up for me.
  10. I just received 4 - 50 watt floods and they won't play in sequence editor. These are the only props in the sequence. They work in HU. They are set up as dumb RGB running on enhanced network and "control lights" is checked. They have the latest firmware. Running S5.
  11. Basically anything with movement. That way you can easily and quickly pick an effect to run for however long you want it to at a certain speed. Take scanner for example. If you want it to run for 2 seconds it would scan pretty fast one time across your prop, but if you want it to run for 10 seconds it would scan slower one time to fit your selected duration. I hope that makes sense. Also, a plain old "ON" button with color selection would be nice too. I just downloaded S5 Beta today so maybe I just haven't figured out the "ON" part yet.
  12. I'm not sure if I'm posting this in the right place, but I think a "Once_fit_to_duration" selection should be available for all motion effects that apply. Without having to manually adjust to the duration selected on the timing grid.
  13. I've had this problem before but can't remember how I fixed it. I'm running my show using the G3-MP3. I have two channels in the show that I need to stay on constantly but they blink between each sequence. It's not a huge problem it just bothers me. Ideas?
  14. Never mind. Figured it out.
  15. I've been using the g3-mp3 for five years with no problems. I know have a 15 second delay between sequences. Why?
  16. High speed fixed the lights staying on problem. Test pattern displayed correct colors. But, now when I play the sequence lights aren't doing what they're supposed to be doing. Any info on this problem?
  17. I configured the Pixcon according to instructions. I hooked it up to J3 using the USB adapter so I have communication. I hooked up WS2811 pixels and when I plug in the controller the lights stay on white and I can't control the lights. Please help, this controller is difficult to work with.
  18. LOR PRO 4.3.14. I've been using LOR for 4 years so not a total newbie. Just new to pixels. Yes I'm running in enhanced mode. First of all I'm having problems with my Pixcon16 board but I'll deal with LOR about that. I built an outline of a tractor on cattle panel. This will be in a remote location so running it with a computer is not an option. I plan to run it with a G3-MP3. (Is this possible?) This is a pretty simple design. I'm using 12V Holiday Coro 2811 pixels. Channel counts are as follows. OP1 - 49 pixels, OP2 - 37 pixels, OP3 - 25 pixels, OP4 - 58 pixels, OP5 - 47pixels, OP6 - 36 pixels, OP7 - 47 pixels, OP8 - 35 pixels, OP9 - 50 pixels, OP10 through OP15 will be a matrix each string having 81 pixels. Total pixel count is 870. Once I get the board problem solved I just need to know how to set up channels, universes, etc. I would like to use LOR "NOT" E1.31. Can someone give me the pixels for dummies version on how to set this up?
  19. Will a Pixcon16 power a G3-MP3 or does the G3-MP3 need its own power supply?
  20. I'll try that today. Thanks for help.
  21. First year trying to use CMB24D with PS-LED-12V-200W power supply and (5) 10 watt RGB flood lights. I have advanced software and (7) CTB16PC's as well. CTB16PC's are addressed 1-7 and the CMB24D is addressed 9. All connections, DIP switches and LOR network jumpers are correct on the CMB24D. When using the HWU with the CMB24D plugged in by itself I can control the flood lights just fine. When I tie the CMB24D into my other controllers it makes the lights on one of the CTB16PC's flash randomly. When I put the CMB24D at the end of line it makes the lights on a different CTB16PC flash randomly. Also In the HWU when I refresh the list it will find 1,2,4,6,7 and 9. When I refresh it again it will find 2,3,5,7 and 9. It changes every time, but it never finds all of the controllers at the same time. If I take the CMB24D out of the system every thing works fine. Light o rama even sent me a new CMB24D but it acts the same. Hopefully I covered most of the obvious questions anyone might have to help solve this issue.
×
×
  • Create New...