Jump to content
Light-O-Rama Forums

Danbel

Members
  • Content Count

    90
  • Joined

  • Last visited

Posts posted by Danbel


  1. 5  units16 CTB16PC channel kit Hight power heatsinks don’t use any more change direction on light All working check video
    Plus shipping and pay by paypal
    Unit 1   $120 one channel not working need change # 2  ic or trac
    Unit 2  $130  test ok
    Unite 3 $120 test ok
    Unit 4  120 test ok
    Unit 5 120 test ok
    All 5 for575.00

    https://youtu.be/tAX_OJfFiAs       unit 3
    https://youtu.be/EogjrckWoGw     unit 1
    https://youtu.be/EJnHHA73yWQ     unit 4
    https://youtu.be/ncJaa7EjA0w   unit 2
    https://youtu.be/dK1WT3rMNGI  unit 5


  2. The link that Don has given you will tell you the highest version of software that your license allows you to use. It is likely that if you are at 2.7, then you will need to renew your licence to get the 3.x versions to work in anything other than Demo mode. All previous versions of the software are available for download on the website, but your license will restrict what you can use.

     

    Regards,

     

    Alan.

    I send email this morning to have license or update I still waiting from them  for response I need this update now Ouf  Thank for reply


  3. I don't know if I right place to ask this question. I have mega tree 1512 channel 12 string 42 pixel each . I have all my string connect to ssc and to 1 smart string Hub . I using Nutcracker to make some effect on ma mega tree .everything good ok .When open my LOR sequence editor ,open my file ,ok. Now I have to do some setting for my channel DMX universe 1 .But i just have 512 channel on universe 1 so .So I need 2 more universe to get my 1512 channel Did I need 2 more Hub or is there something I don't know??? Or can I set my Hub on 3 universe same time??? Or some setting in my LOR software For my Arches no problem because lower 512 channel

    Sorry for my English Dan


  4. Denis Chaput wrote:

    Sa regard bien j'aime bien ce site
    • Ce que j'ai MY new hobby this year4 Etherdongle Kit assembled flashed Pixelnet
      2 USB DMX Dongle V 2 assembled flashed Pixelnet Plus USB DMX 1 RPM
      90 Smartstring controller kits
      6 Smart String Hub w 12v kit really to play

    6 controller LOR

    et plusieur autre equipement jai pas commencer a soude

    900 pixel node maybe more Lumière je sais plus
    et beaucoup travaille a programmer surtout avec les pixel node Je saie pas si je update avec Superstars BY LOR ou LSP et xlight .je sais il faut que je fait vitre avec mon nouveau setup j'ai beaucoup programmation a faire (Sequence) Merci Deni


    POur le site du haut je vais regarder va plus pres Merci :)


  5. Denis Chaput wrote:

    Bonjour Danbel

    Est ce que tu regarde pour quel sorte de software tu veux utiliser LOR ou LSP . Pour pixel mode il y a beaucoup de choix. Est ce que parler en francais c'est plus facile.

    Denis
    Sorry guy wasn't me 'he was my older boy he was trying helping me with software I need for my pixel light I told him that we need to read in forum before ask question and then try find answer I knows there difference software on Market Yes we are acadian french from the east coast Thank Denis to explains that to member Merci Denis
    Ok Denis j'ai programme LOR J'ai dit a mon garçon peut-être acheter le programme LSP .Mais avant il faut que je vérifier des choses avant Merci:D

  6. Need Some one half sequence of xmax tree i looking just haft sequence be good enough
    I till find out that and why is working and with software i shout buy thank Ii never working with pixel node I put to mush money inside How I need to programme all that for the software I have hard time desire with SOFTWARE TO GET LOR or LSP Thant









    I had 90 ssc and 5 ssh 9 125 node PIXEL 5 ERTERNET PISELPIXEL ETC'''
    6 lor 16PC 2 DIY LL


  7. I would like to able to use my DMX not IDMX Because idmx VERY EXPENSIVE .Because it might take few few week before S3 comming out I know in S3 I be able to use my DMX dongle For now it would be nice to have driver install in S2 so we can use DMX Dongle etc... I have few RGB and I need my DMX to play those light . I don,t want to go with LPS or Vixen
    I love LOR I use to that programmed :P


  8. Well if nothing come out in future month for software I might start to look difference direction I going with RGB pixel this year i need a good software Come on Dan you need to make big move Fast or Update that go on :D


  9. jimswinder wrote:

    IF and when the CCB's are ready for purchase this year, I am looking at possibly using 9 less controllers (144 Channels) and 10,000 lights this year...even though I am adding about 6 new elements to my display.

    Is anyone else going this direction due to an increase in your use of CCR's and CCB's?

    Yea, I know...ya all will do me a big favor and take my extra lights and controllers off my hands...

    You guys are the best!!! :)
    Me too I am waiting for something come out I put all mini light off and go for RGB and RGB pixel I am go to need few board for RBG pixel, faster I can get them faster start to work with them .I hope new software LOR come out few month before Halloween I go to need few new setting before intalle everything on I looking to spent few $$$$ this years :D:D

  10. cenote wrote:

    KenL_MCSE wrote:
    CNote ordered some, they should be here this week. i will ask him to post his findings and videos... they look very cool!!!! DIRT cheap too

    pssst., I ordered NON-pixel stuff, RGB stings. Shhhhheeeee, it's a secrete....:)
×
×
  • Create New...