Jump to content
Light-O-Rama Forums


  • Content Count

  • Joined

  • Last visited

Everything posted by xtremeone

  1. Would GREATLY appreciate a copy. Xtreme2966@yahoo.com
  2. My guess is you will need to install firmware updates to your controllers....I had the same issue. I updated the firmare on all controllers and all was bright and blinky again:)
  3. Ok, I have been sequencing in Pixel Editor and def like what is able to do....BUT....I am running into this issue for the last week. When i first open the Visualizer, I get the error in the attached pic. My question is, how do I connect Visualizer to the correct folder? I see the XML in the program files LOR folder, but do not know why visualizer can not find them. Any help fast would be great as I am trying to launch Halloween and need to find my saved settings. Thanks Xtremeone
  4. Would love a copy please. Thanks a bunch!!! xtreme2966@yahoo.com
  5. Quick question....sotry ifor this been answered. Am I correct in reading that these are connected just like a controller to the netwotk?
  6. Could I please get a copy of the Pentonix singing faces. Thank You!! xtreme2966@yahoo.com
  7. I have a 3 year old that would love this!! May I please get a copy. Thank You!! xtreme2966@yahoo.com
  8. Good Morning, Could I please get a copy also. Would be much appreciated. Thank You! xtreme2966@yahoo.com
  9. Yes...I tested in hardware utility...lights a totally different color...also different color in sequence compared to other 7 also shuts off when others on...like one rgb channel is wired wrong.
  10. Mine was purchased at Summer Sale...just getting around to testing it...would love a solution. Mine was purchased at Summer Sale...just getting around to testing it...would love a solution.
  11. I am having the EXACT same issue. .mine are on channels 16,17,18. Tried EVERYTHING new strip, new power supply, looked bored completely over thinking there was a solder mishap....so frustrated!!! Meant board...oops
  12. Am doing my first lor lightshow this year....would love this for my 3 year old:) thank you!! Xtreme2966@yahoo.com
  13. Am doing my first lor lightshow this year....would love this for my 3 year old:) thank you!! Xtreme2966@yahoo.com
  14. Ughh...well thank you soo much for the replies....pretty sure it was a freshman mistake. The hardware utility found the board and of course i was testing the board and dumb strips on the test utility...but....the test utility in hardware fig had 16 channels to test so when i turned on all lights all lights button 16 channels came on which I am used to...well of course the cmb has 24 (8) rgb. So it wasn't showing the other channels. Anyway off to see how the sequences I have been working on are turning out. All it appears working..That cmb 24 video instruction suggested in another thread can't come fast enough for us newbies!! It was something so basic....ughhhh.
  15. Ok....got my new cmb24 board found and working on the s3 advanced software. Hooked the dumb strips up....run the test and all colors are a light blue color but the last 3...they are 2 green and one red. It is not the strips because they turn the light blue when plugged into the output that is I assume the right one...light blue. It has to be the dip switch or the board. First I guess the first question is all strips are the same color on the test config when all on...correct...then the next question is the dip came with 9 up but config could not find board.So I searched and found someone who got it working with 1 and 9 up...the config found the board with these dip settings. Any suggestions? It is now 11:30 on a Sat night and my life has come to this...lol...I am that guy that will now have a beer and go to bed tossing trying to figure out what it could be. Thanks in advance!!!
  16. Hey Guys, Been lurking for years and slowly buying controllers and s3 full license. Bought a couple of Crackers sequences to grasp the whole process. On a side note, I work as a software developer and html designer and had been a dj back in the day. I thought sequencing would be be a piece of cake....HOLY CRAP! The talent in some of the display sequencing you guys are doing is incredibly under appreciated! Anyway...I have several (over 30) led dj lights such as 3 w led pinspots .I would LOVE to use these on the outside of the house under the roof awning to accent the dumb RGB around the house since they are just sitting and cost around 70 bucks a piece when purchased. What can I do to make these dang things waterproof? I thought about building an encloser for each one and putting plexi glass on the front with a fan vent of some sort. Thought about wrapping them in packing saran wrap material. The best option would be if I could silicone the whole fixture.... and call it good. I searched the forums and could not find an answer. Anyone??? Thanks Xtremeone
  • Create New...