Jump to content
Light-O-Rama Forums


  • Content Count

  • Joined

  • Last visited

Everything posted by billy1776

  1. I would like a copy sent to whanley1@gmail.com I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share. -Bill Hanley
  2. JR, may I have a copy? whanley1@gmail.com
  3. may i have a copy, please? whanley1@gmail.com
  4. May I have a copy please? whanley1@gmail.com
  5. Thanks, everyone. It ended up being the cable connecting controllers 4-5. I don't know if it was bad (both controllers worked fine), but when I swapped out the cable, controllers 2 and 3 went solid and connected.
  6. Jason, did you ever get this fixed? I'm having this exact same issue. 5-controller setup and controllers 1,4,5 work fine, but 2 and 3 don't work at all. LED on board of CTB16 blinks and never goes solid. Passing through these two controllers works, as controllers 4 and 5 work fine. These all worked fine for Halloween. I've replaced all cat6 cables, swapped out controllers, reset controllers. No change.
  7. Still blinking LEDs. On one sequence, I do get some random channels firing on controller 2. Reset 2 and 3 to factory settings, then set the unit IDs
  8. Is anyone willing to share the faces for heatmiser/snowmiser from Year Without A Santa Claus? whanley1@gmail.com
  9. Yes both are powered separately. I'll check jumpers, now.
  10. The order is 1,2,3,4,5. They are a mix of generations: 1 - Gen 3, v5 2 - Gen 2, v4 3 - Gen 3, v5 4 & 5 - Gen 3, v5 I have a Gen 3, v5 spare
  11. I have a setup of 5 CTB16PC controllers and controllers 2 and 3 will not connect. The LED on the board blinks green. Controllers 4-5 do work fine, though. I've swapped out all the cables, and even swapped out the controllers and the problem persists. Controllers 1,4,5 work fine, but 2 and 3 won't connect. Any ideas what could be causing this? Could it be the show? The problem occurs for all sequences. I've tested the channels on the two problem controllers and they test fine using the hardware utility. Thanks, BIll
  12. JR, may I have a copy, please? whanley1@gmail.com Also, are you taking commissions for singing face work for christmas season?
  13. May I have a copy of this? This is great for elementary school kids. whanley1@gmail.com
  14. May I have a copy, please? whanley1@gmail.com
  • Create New...