Jump to content
Light-O-Rama Forums

CRMSNRD

Members
  • Content Count

    16
  • Joined

  • Last visited

Community Reputation

0 Neutral

About CRMSNRD

  • Rank
    New Forum User

Profile Information

  • Location
    PETAL, MS
  • Occupation
    FINANCE

More About Me

  • Favorite Decorating Holiday?
    CHRISTMANS

LOR Software

  • LOR Software Version
    4.4.4
  • License Level
    Pro

Recent Profile Visitors

65 profile views
  1. That's what I figured so I did it the opposite way. I expanded both and just turned 2 of his channels into 1 of mine
  2. yes, I am running three networks. one at 56k, one at 500 enhanced and one at 1000 enhanced
  3. this is what im copying from. all I did was expand my controller and expand his and then copy and paste 100 channels at a time. no idea what you mean by grouping them
  4. idk, I guess because that's the starting channel that's what it named it. after 100 pixels it goes to a3a, then a3b etc
  5. yes,i have the lor mode checked on the pixcon
  6. and then each port has 100 channels under it and so on
  7. IT IS FROM HOLIDAYSEQUENCES.COM. IIT IS SET UP AS A 24 DMX. 50 PIXELS PER PORT
  8. I can ge a picture of my channel layout when I get home, but I set the controller at 39 and went 100 per port for 12 channels. I put the zig zag setting at 1 but im not sure that is right because I can t tell if that's 1 pixel or 1 set of 50 or what. that may be my problem
  9. MY SOFTWARE VERSION IS 4.4.4. PRO
  10. sorry, I have 1 port running 100 pixels. 50 going 1 way then up one and back 50. I put the zig zag at 1 but not sure that's what it needs to be at
  11. I use the sequence editor, bought the sequence from holidaysequences.com. copied and pasted the 1000 channels into my 1000 channels. only difference is he has 24x50 and I have 12x1000. set up the pixcon 16 and worked ok the first time I used it. you could make out what was going on but it was a mirrored image so the guy told me to try a faster speed so I ordered the g4 mps player and made a port 1000 speed. it got worse and on two strands only 50 pixels are working and on 2 about 70 are working. This happens when I run the test also. I am using s4 I believe. don't really use a pixel editor
  12. I bought a 24x50 matrix board and a pixcon 16 controller. the sequence im using is from a dmx 24 channel sequence. I am running 12 universes with 100 pixels on each but just cant get it right. What setting do I need the pixcon on? I have 1 under zig zag and tried it at the 500 speed and looked like it wasn't running fast enough. so I tried it at 1000 last night and it was all garbled. Do I have too many lights on one channel? any help would be appreciated! thanks!
×
×
  • Create New...