Jump to content
Light-O-Rama Forums


  • Content Count

  • Joined

  • Last visited

Community Reputation

2 Neutral

About mcmpros

  • Rank
    New Forum User

Profile Information

  • Location
    Tulsa, Oklahoma
  • Occupation
    Field Service

More About Me

  • Favorite Decorating Holiday?

LOR Software

  • LOR Software Version
  • License Level
  1. Need to start the lor control panel and then enable your show. Place your sequences in a show via the show builder. Hope I have given you the missing link
  2. Need to start the lor control panel and then enable your show. Place your sequences in a show via the show builder. Hope I have given you the missing link
  3. mcmpros

    linus & lucy

    I have a simple sequence to it. Pm me your contact info and I'll send it your way.
  4. Did you build a show? Use show editor or simple show builder
  5. One thing I have found out to help is inventory items on hand, at least as much as possible. This way during off season, if there is such a thing, you have a idea of what you have as well as where new pieces will fit into the mix.
  6. Lights can be purchased anywhere you find a good deal. Walmart has 12.5 lit length 25 C7 bulb led for 6.00 each. So with that get 20 boxes you're looking at 120.00 in lights
  7. mcmpros

    NC Roll Call

    Also everyone should get your show listed on christmaslightfinder.com
  8. Two things you might look at with your design. 1) Have someplace on the pole to attach a few guide wires or ropes 2) Check the lighted length of your lights and make sure with your 11ft pole you have enough slope to form the girth you seek at the bottom, last thing you want is an 8 channel lite pole.
  9. You could easily do 4 channels per a tree. Now whether you want 4 different colors, 1 to each channel, or you could all the same color and have variations maybe horizontal lines or vertical lines. You could even have variations of colors and action or lines. The possibles are near endless what you can do with a standard 4 x 4 setup
  10. The simple response 1 channel per each facial feature. Ie eyes channel 1, mouth channels 2-4 or more depending on how many different expressions you want. Use whatever channels configuration you want that works with your setup. If you use my example of 4 channels per a face, you could easily have four faces singing on one controller. Hope this helps
  11. Where did you get your lights from?
  12. I successful ran my show last year on Win 8 with no problems.
  13. Agreed! I doubled my show size for this year and it started in December of last year. Best wishes now on with the show
  14. Welcome back and congrats! My opinion would be 1. Put the fog machine on a separate timer, not on the controller since its always on. Just set the timer to allow for the 4 minute warm up time before the show starts. 2. The box stores will start getting their Halloween out by the the end of the month or first of September, mainly after schools starts in your area. Or you could also look online and find good deals on incans. 4. You might think about purple net lights and orange columns kinda of break it up and let the singing pumpkin stand out more. Well there is my opinion hopefully it answers most of your questions and good luck.
  • Create New...