Jump to content
Light-O-Rama Forums

Leaderboard


Popular Content

Showing content with the highest reputation since 09/03/2018 in all areas

  1. Just wanted to post and say JR Dibble and James Morris contribution’s to this forum are invaluable. You guys set the bar and thank you for all what you do!!! Rock on!!!!
  2. [Admin Edit - Note: There is now a video at the bottom of this post. Not the thread, this post.] In lieu of all the members I have assisted with setting up and configuring their pixie16 and the pixie2/4 and 8 controllers I am going to see if this will provide some relief to you the end user, myself someone who likes to help others and the LOR Help Desk who get a ton of requests at this time of year and the end user may not understand the volume of help tickets. Also more than a few recommended I write this up. So here it is. If you follow these steps in order you should have lights at the final step as long as your light strings or strips work. I am writing this as an S4 user. S5 users can follow the steps to a certain point. At which time you will have to have a basic understanding as to how to add a pixie device to your S5 sequencer. Things to consider: 1) The pixie16 and other pixie devices will only control "smart" RGB lights 2) Do not get wrapped around the Hardware Utility for anything more than setting the Unit ID, light color order and a minor test. The HU has nothing to do with the controller running the lights outside of the HU. Once you close the HU the rest is with you the end user to ensure the network is set up correctly and the device is added to your sequence. 3) The newer pixie controllers will have 8 dip switches. Please familiarize yourself with the location of the switches. From the factory one dip switch will be in the "on" position. This dip switch in the "On" position will not allow the user to set a Unit ID other than 1 4) The pixie series controllers will automatically assign the unit ID's after the user selects the first one. If you attempt to interfere with this process by manually building the unit ID's and not follow the Hexadecimal protocol you will have channels (units) that will not work. This is the time to start talking Units, the pixie series assigns unit ID's not channels like the AC controllers. You must remember this especially when you start adding other controllers or you will have conflicts. Example: If your pixie16 has a starting Unit ID of Unit 1 then the system will assign it to Units 1, 2, 3, 4, 5, 6, 7, 8, 9, 0A, 0B, 0C, 0D, 0E, 0F and 10. As you can see the system uses an alpha numeric Unit ID after 09. This is consistent across the board. Any number that has a nine the following 7 unit ID's will be alpha numeric. Based on the pixie model you may have. Pixie2 - 2 consecutive unit ID's Pixie4 - 4 consecutive unit ID's Pixie8 - 8 consecutive unit ID's Pixie16 - 16 consecutive unit ID's Lets get started: Items required Pixie controller 2/4/8/16 can all be configured using these instructions. Black RS485 or Red RS485HS adapter (red preferred) red is backwards compatible and with the cost being a few dollars more than black - makes it worth while. A spare is always good Cat5 cable(s) Time - its best to start this only if you can dedicate an hour or so without interruption Of course a computer Lets get started- I am going to keep the steps as simple as possible 1) connect the RS485 (black) / RS485HS (Red) adapter to the computer - if you have not previously configured the adapter do so using the LOR provided instructions prior to continuing on 2) Inspect the pixie controller and look for those dip switches. As mentioned above the newer units have them. If yours does not have them you can skip the next step 3) If you are using the pixie controller as any unit ID other than Unit ID # 1 please turn off the dip switch that is currently on. All dip switches should be in the "off" position. If using as #1 you do have the option of leaving it on or turning it off thus enabling you to change the unit ID without forgetting this step later on when you add additional controllers. 4) Open the Control Panel - this will vary between users so I will not cover that. 5) Ensure the Comm Listener (CL) is running. You should see a CL on your task bar. 6) Connect only the pixie device being configured to the RS485 adapter. Remember one unit at a time is the best way to prevent issues while configuring any controllers. - Note if you disconnect the RS485 adapter from your computer you need to remember which USB port it was connected to. 7) In the HU on the left side you should see the comport that your computer found and assigned your RS485 adapter to. Refrain from refreshing this or using the "auto configure". 8 ) On the right side of the screen you can adjust the "max number of unit ID's" if it is set to far beyond your controller numbers it takes additional time searching the network. Optional 9) In the center of the HU there is a "Select Unit to Configure" button. Now is the time to press this and the HU will search for the controller. The light on the controller should be solid on. 10) Once the HU is finished you should see your device listed in the box directly under the heading. 11) It probably found 01- Pixie... and version number (unless the unit number has been changed to something else) it will show the appropriate Unit ID 12) If the Unit ID is not the Unit ID you wish to have assigned you change that in the bottom left of the HU - select "old Unit ID" and "new Unit ID" then "Change Unit ID" you will see the message "Unit ID has been set to..." 13) Now to check the color order of your light strings (if you have them) if not you can refer back to this step once you have your light strings or strips. 14) At the bottom of the HU screen you will see a "Config" button - select that 15) Towards the bottom center you will see "CCR/ Pixie device" - select that. 16) Select the ribbon/ string model number 17) Select the color order - if known, you will test and be able to change this in a couple more steps. Note different mfg color order may vary. Its best to not mix and match because with pixie device you cannot change the color order of different Unit ID's. Triples RGB. RGB, RGB is also in this step. 18) Select the number of pixels per string 50 / 100 16) Resolution - I have never changed the resolution from the default 17) Apply and then you will receive the "changes have been applied" box. 18) Back to the HU main page for color testing. Its pretty self explanatory so I will not cover it. If you select a color and the color is different ie; you select Red and the color is Blue this is where you can go back to the config/ CCR/ pixie config above and change the color order. 19) Note - If you selected 100 pixels in step 18 above but you only have strings of 5o, during testing there will be delays while the controller is attempting to light pixels that do not exist 20) Once you are happy with the color order you are finished in the HU. Close it out but leave the controller connected. 21) I ALWAYS perform this test while assisting others - reopen the HU and select the "Select Unit to configure" "Refresh" button again. This is to ensure you did not miss a step or forget to turn the dip switch to the "off" position if needed. (I recommend you turn it off) 22) Once you have verified that the HU found your correctly assigned Unit ID you can now close the HU. 23) Now we will set up your Network Configuration 24) In the Control Panel drop down list ( just under the HU) you will find Network Preferences (NP) click on it to open 25) If you have never opened this before on the right side of the box you will see "simple mode". 26) You want to press the "Advanced" button just under the "Simple Mode" 27) The next box should resemble a spreadsheet (green and white rows) 28) You will have 3 tabs LOR/ DMX and Misc. We are keeping it simple and not discussing either of the DMX or Misc tabs. 29) Select the LOR tab 30) You will now see your networks. Most users probably have only one network 31) You should see LOR Regular and under that the various Aux network 32) We are concentrating on the Regular LOR network 33) You will see the speed. By default it probably shows 57.6 kbps - click on the speed- you will now get a small pop up window. Use the drop down to select 500K 34) In the same box you will see an "enhance" box- click that - it is crucial you do not miss steps 33 and 34. If you do this you will not have lights 35) Click "ok or apply" 36) you will get the 500K warning, do not worry about it 37) you will receive the "enhanced" warning. once again disregard 38) Select the "OK" button on top right of the scree and NP will close - you are now almost ready to have lights on 39) Setting up your pixie in your sequence - this is where S5 users should refer to the S5 manual. I do know there are two methods to add a device to S5. One is through "Prop Definition" the other is in the "Preview Editor" the latter found on the right side of the screen. That is my knowledge. 40) Back to S4 users 41) Open an existing sequence "if you have previously used SE and have a controller configured" 42) If you do not have a sequence and are brand new 43) Open Sequence Editor from the Control Panel or your Programs menu 44) Select "File" 45) Select "New" 46) Select "Musical Sequence" 47) Now is a good time to remind you that although it is not mandatory it is best to keep your "Audio and Sequence" files in the correct LOR directory. My Documents/ Light O Rama/ Audio (for music and Sequences for Sequences. 48) Select the audio file - just select the first one since this sequence will be scrapped later (unless you plan on using this song to create your first sequence) 49) SE will process the audio 50) You will now get a "New Musical Sequence Option" box 51) On this first attempt I just ensure that in the bottom right corner under the " Initial Timing" box that "use a fixed timing grid" is selected. All other defaults are good at this point. 52) Press the "Ok" button 53) Your sequence working grid will appear 54) If using the defaults in the previous steps you should see 8 Channel buttons on the right side of the grid. (if you are new) If you are familiar with SE and have controllers already built into your config skip the following steps and pick back up on the add device step 55) If new and do not have any other controllers then perform the following 2 steps 56) Right click on the bottom channel button , it may say port or channel 8 57) in the drop down select "remove channel from track" 58) A warning will appear asking if you are sure - select "yes" 59) That channel will now be removed from the working grid leaving you 7 more, repeat steps 56-58 until you have only one channel remaining 60) Right click on the remaining channel 61) On the drop down you will select "insert device" 62) in this tutorial you will select "below" if you are a previous user having a configuration you may wish to select "above" but I recommend "below" for you as well 63) You have the option to "Name" your device. If you know what you are using the Pixie for it is recommended to name it. Example: CCR Tre 62) To prevent clutter I ensure that the box directly below is Not checked. "Include Base Unit ID's" 63) "Device" if the pixie 2/4/8/16 is not in the box use the drop down to select that device group *** At the moment if using the Pixie16 for anything over 100 pixels at step # 63 select Pixcon16 instead and at step 66 select 170 for pixels per port. Light O Rama will be updating the manual and the firmware in the near future. 64) Ensure "Add as a group" is selected. Once again to declutter the Unit list 65) The next box should say Pixie 2/4/8/ 16 - use the drop down menu to select your particular model number 66) "Pixels per Port" once again 50 or 100 67) "Channel Mode" Triples RGB, RGB, RGB 68) "Base Unit ID" this must be the same unit ID that you assigned in the HU setup process 69) "Network" for most users this will be "regular" if you have additional networks you know who you are and what to select. This must match the network that you assigned in the Network Preference (NP) steps 70) Select "OK" and now you will see your pixie on your sequence working grid 71) If you were one of the members that deleted the 7 channel buttons in the previous steps now is the time to remove the last channel button. Leaving only your pixie device 72) If you followed all of the above steps you WILL have lights as long as 1- you physically have lights and 2- the lights are not broken 3- lights are connected to your controller 73) Testing you lights 74) On the open sequence - if you "grouped" the pixie as described above you will see a "+" sign 75) Select that and you will see 16 channel/ unit ID buttons 76) The buttons will be grey and to the right your working grid will be black 77) We are now going to write your test sequence 78) On the right side of the SE "tool bar" you will see a yellow star 79) To the left of the yellow star as you put your mouse over the different tools you will find the "color fade" tool select that 80) A pop up box will appear it will have a fade from red to green. This is the tool you use to place colors to your RGB sequences if you use SE to create your RGB sequences. In order to have solid colors just select the same color on both ends 81) For this tutorial you will leave it as is Red to green 82) I am going to show you how "I" use this tool for testing. IMO this is the fastest way to fill the entire sequence and will teach you haw to use the copy/ paste fast feature 83) Use the scroll bar directly under the working grid and drag it all of the way to the end (right) of your sequence. 84) Place your mouse on the top "black row" probably pixie... port 1" 85) Right click in the last grid box and drag it all of the way to the left (beginning) of the sequence. Note- to make it faster you can drag it all of the way to the edge of your computer screen. You do not need to stay within the working grid. Before you release the mouse you can also drag it all of the way to port that corresponds to your pixie model. Thus filling the entire pixie working grid with color. I will discuss the copy paste method next. 86) Because you scrolled to the end and dragged to the beginning your color fade will be green to red 87) If you only filled in one row the fastest way IMO to copy paste that row (s) is right click on the first grid square- select row (s), that entire row will now be encapsulated in a white box. Now right click in that box. "copy". To paste - place your mouse in the next Unit/ Channel/ Port and right click - you have the option to select "paste or paste multiple" select the one that coincides with your situation. If you selected the "multiple" you will be given another option "Vertical" (top half of the box) or "Horizontal" (bottom of the box) In this instance you will select the bottom choice and fill the correct number based on how many ports you wish to paste to. Once you press ok it will perform the action and your entire pixie device "should" have a sequence filled within. 88) Once you have the sequence filled and your lights connected. Go to the "play" tab on the tool bar. At a minimum ensure "Control Lights" is checked. Your light WILL NOT work if this is not checked. 89) Also under "play" scroll down to "Play Range" and ensure "Entire Sequence" is checked 90) On the tool bar you will see a "Blue Arrow" your "color Fade" tool is probably still open. Push the blue arrow and it will turn off the color fade tool. If you forget to turn that off, anytime you put the mouse and click it on the working grid it will place either a color or grey fill. (that's something to always remember) 91) Now push the "Green" play button. If all was performed correctly you WILL HAVE LIGHTS. 92) For those of you that do not have lights and wish to test your controller - refer to the Visualizer tutorial in the "Help" guide in the Control Panel drop down menu. Or feel free to PM me and I will send you a CCR tree viz file to help you test your light. I probably have one that is already set up for almost every pixie config within unit ID 50. If I don't have one it only takes me a few minutes to create one for you. Best of luck and if you need further assistance feel free to submit a Help Desk ticket or PM me. Note from Sept - January I am very busy with my show and helping others but I will reply. Happy Lighting JR ---
  3. When I closed my show down last night I had a note left in my mailbox and this is the true Spirit of Christmas and why I do this: "I just wanted to honestly thank you and your family for this wonderful gift to the community! I recently had surgery and its killed my entire holiday spirit, including Thanksgiving. I brought my boys by this evening and ended up overwhelmed with the holiday spirit and even cried. It made me feel like a kid again, to the point that I was ashamed to have let my recovery ruin so much for me. Seeing my children's faces light up just filled me with so much joy that I'd lost this season. Thank you guys again! My boys want to come back so I'm sure we'll be camped out again later this week. Thank you and blessings to your family!"
  4. I have this version if anyone is interested
  5. A few years ago Doug “Wire Frame Delights” made me a 6’ singing bulb. I never got around to using it and converting my show to RGB so about a month ago a member stopped by my house to see my setup and get tips. I gave him that to get him started perhaps with singing faces but if not it is still a nice prop to light. My friend Orville helped me out a bunch and never asked for a dime even though he was going through tough times due to the hurricanes. Always much appreciative for all of the help and all of the friends I have made along the way. JR
  6. Havent sequenced it yet... Just finished mixing the audio 5 minutes ago and sharing it for all of you who enjoyed last years mix I made. I will post a shared sequence in a month or so when I finish it... This is just for those who wish to download it and get started on the sequence. Fair warning it's a long mix but it's all over the place to help mix it up a bit. Do you have what it takes to light this one up? Show me what you got after you sequence it! Here is the audio download link for those who want to download it. As always, This is FREE USE for all Christmas decorating fanatics but do NOT sell the audio or sequence. This is custom mixed by me and I am doing it for the love of the holiday. Share as you wish, mix it, add to it, make faces, whatever you like... Just do NOT sell it! This is my yearly giving back to the community! Audio file download link https://drive.google.com/file/d/1xf3e6Q7PIpfGZxrxv1J9KCnWFtVGcnei/view?usp=sharing Click here to download from google drive Hope to see you all in Daytona at the Christmas expo On July 20th at the vendor hall! I will be there wearing my GriswoldStyle shirt
  7. Veterans Day is a time to honor American veterans of all wars. Each year we set aside this special day to remember those who have served in our armed forces. From those brave service members who fought and died in the trenches of World War I, to those who are fighting on the ground, at sea, and in the air today, we owe them our deepest respect and gratitude. To all of those that are serving or have served we salute you.Thanks,Wireframe D'Lites
  8. Here's our show for 2018 Intro- 0:00 Greatest Show- 2:06 Holiday Mashup- IM5 - 5:42 Christmas Eve/Sarajevo- Trans-Siberian Orchestra - 7:49 Jingle Bells Techno- Master Tone - 11:10 Light of Christmas- Owl City (Feat. Toby Mac) - 12:53 Wizards in Winter- Trans-Siberian Orchestra - 16:40 Static Display - 19:52
  9. You are very ambitious with this request. LOL JR
  10. I am somewhat a grumpy guy. But Christmas brings it out of me. I like to be happy. So to have what happen tonight. Wow. I have had good feedback from neighbors. Tonight I received homemade cookies. You can’t put a dollar sign to that. Oh I am so going bigger next year. Those kids I saw tonight make it all worth it.
  11. I would like to ask a favor of all my friends here. Halloween is my wife's favorite holiday. With be not being able to do her show this year, I would like to try and make her feel a little special. Would any of you be willing to send my wife a Halloween card? Thank you. Raenee Thompson Po box 568 Siletz OR 97380
  12. Orville made a 'one word post' !!!
  13. Orville, as you know if the earth was flat ,cats would have pushed every thing off it by now. !
  14. JR and James I would like to thank you for all of the sequences that you share with me (and everyone else) Your kindness is just above and beyond what anyone should except of you. Without your help and kindness I would not be able to have a show like I do. Especially the big Boy Scout show in the middle of April. For the other people reading this, these two GENTLEMEN put in so many hours making these sequences then SHARE them, not sell them to you and me just out of the kindness of their hearts. Once I get some video of the show I will post the links to it Thank You, Again YIS Marc Gerner Gernergang@gmail.com
  15. All of this IS GONE as of Monday February 17, 2020. It WAS NOT SOLD! I gave it all away to an LOR forum member in Florida that was able to come and pick it all up. I'm not going to say who got it, but they will let you know when they're ready to reveal who acquired everything. Why for free? Because it was just taking up space and collecting dust, I had an extra controller I no longer needed and had read about a person here on the forum saying they're going to need another controller to up their display. And I've had quite a few folks on this forum pass things on to me and help me out a lot as well, I can't name some of them, but they know who they are. And a few have posted who they are with what they've sent to me. So I'll leave any names to be posted or items I received completely up to their discretion. So, because of these generous and kind folks on the forum that have helped me, I just opted to PAY IT FORWARD by helping out another forum member with these items. I Pm'd them about the items and controller and offered everything up for free. I had tried to sell them at various times, but never got any takers, and I really, REALLY needed to get rid of this stuff. And since I don't drive or have a vehicle, shipping them was out of the question for me. So after the PM's, they were offered and accepted by a LOR Forum member who's only been in the hobby for a short, not all that short, time and could pick everything up from my location. I hope they enjoy the controller, it is a V2, pre-built by LOR CTB16PC and all the Halloween Decor they scored on Monday 02/27/2020. So this topic can now be closed if the moderators of the forums would want to do that. Thank you.
  16. Orville

    lor

    What? You didn't see the new list of all these cool items from LOR? A Trio {3} of Singing RGB Hearts for Valentines Day An RGB Singer Jester for April Fool's Day A Singing RGB Leprechaun for Saint Patrick's Day George Washington, Abraham Lincoln, Barrack Obama and Donald Trump RGB Singing Presidents for Presidents Day Two versions of RGB Standing Singing Soldiers for Veteran's Day and other Military Holiday/Homecomings/4th of July. Two versions of Seated Singing Soldiers {1 in a wheelchair} for Veterans Day and other Military Holidays/Homecomings/4th of July. 5 different RGB Rocket variations with RGB launch trails and RGB explosion effects for the 4th of July and New Years Eve. A singing RGB woman face for Mother's Day/Secretary Day/Boss Day A Singing RGB man face for Father's Day/Secretary Day/Boss Day An 8 foot tall RGB Singing Snowman for Christmas An 8 foot tall RGB Dancing/Singing Skeleton for Halloween Prices and availability to be announced. How did you miss them? Look down Keep Looking Still looking? Good. Are you ready yet? Nope, haven't heard a thing really! Well you did ask, so thought I'd put out a wish list of things that'd be nice to have in a display setting for other Holidays throughout the year, as well as Christmas. But thought I'd just put out some suggestions for all those DIY folks that can do this type of stuff and a possible hint to LOR for future display items. Would I like to see things like this from LOR? Of course. Now if any come to be, that'd be great to have pre-built, ready to go, made by LOR for some of us that just don't have the skill set, or the time/resources to create such things.
  17. Thinking about coming back this year on a smaller scale - maybe only 1 SPIRAL TREE and some outer props. Earle
  18. OMG...today they added 2 big inflatables!!! 😄 If they keep this up I'm going to sneak into their yard at night with my LOR controllers, mini-Director, outdoor speaker, & SPT1 cords and rewire all their lights & props! And something tells me they might not even mind! 😄
  19. I personally created this mixture of this audio and it is about a 4 and a half minute mix. It is a mixture of a bunch of songs and movie clip audio. Sharing now. NO SELLING This is free for everyone to use. Feel free to adjust it to your display as needed. Feel free to re-share any added parts. But please give credit where credit is due. Audio link https://drive.google.com/file/d/1MH0Mc3vGSPAcCXiAGdUfFpzvgwvC5LCm/view?usp=sharing LMS link (contains 64 ac channels, 4 pixel arches, 8 rgb mini trees, 5 channel ac arches, and dumb node mega tree) Last 16 ac channels are neighbors house on a single 16 channel controller https://drive.google.com/file/d/1Qn9qlivL49IixqMEvN6OemtJ-iXPHz2S/view?usp=sharing
  20. That’s a Homeowners Insurance Policy payment preparation. You just never know what may happen and then you will feel the wrath. I have spikes and all sorts of fun stuff to be driven into a skull that should fall on it. At Christmas most don’t get out so no worries. But in Halloween night , not gonna happen. I will be there to stop any child from getting hurt or worse. When you normally get and expect 300-400 and they come in trucks, cars , vans, busses and trailers and normally get out in 10's you just cant have that many at once running through a display, no matter how prepared it is. Heck I run cables through pvc conduit over my sidewalk that is secured by spikes in the ground and yet UPS, FEDEX, USPS and the latest even Amazon Prime drivers still trip over it. It is 3" diameter. And that is in the daylight. I love children that much that I will not allow them to risk injury or death in my yard. Not even my 2 boys go through the yard when I have a display. JR
  21. I've heard many on the forums and on FB state they use other brands - for whatever reason. Since getting into this hobby many, many years ago - I've only used LOR products. Had a very few warranty issues and LOR stepped up - and fast on all of them - controllers, floodlights, cat5 connectors - whatever failed - LOR helped me get back into blinking. So again - I only use LOR, some assembled, some complete need assembly, some cards only and used all my own stuff to finish building. Well, the reason for this post today - I'm assembling controllers #18 and #19. I have a habit of not being gentle in most all things I do - kinda bull in the shop... When putting the power female connectors onto the board you need to insure a good connection - properly placed slide-on is not between the outter insulation, all the way engaged, etc. I use my needle nose to grab the connector as my "fluffy" hands don't always fit. Well, I slipped with brute force and pounded the 303 board chip so hard you would think I purposely was trying to smash it or knock it off. Just finished assembly, went to hardware utility, took a deep breath - bamm! To my surprise the channel I sabotaged works perfectly. Thanks LOR!
  22. Finally sequenced it. Here is the download link for the LMS file and here is the preview video. Preview video is kind of crappy due to recording on phone from laptop but it gives you an idea of what the sequence has. Download LMS here... Includes AC channels, Pixel arches, RGB Floods https://drive.google.com/open?id=1ZgutAnl-PxPZjjUouoUWAxA_luTzcNVR Audio Link is here https://drive.google.com/file/d/1xf3e6Q7PIpfGZxrxv1J9KCnWFtVGcnei/view?usp=sharing Preview video below If you make faces for this, Please share them with me. Thats all I ask. Again, Do NOT Sell the sequence, audio or any part of this. It is FREE for all to use in their displays. Alos if you download please remember to show some love and click that like button or post a comment. I will try to upload a new one each year if they continue to be popular.
  23. HI Everyone, I'm sure most of us do our over the top displays and light shows because we enjoy seeing them and our family members do too but you never know who will stop by out front of your house to see your lights. My wife and I, unfortunately, recently were at our bosses mothers funeral. Her husband hired us over 20 years ago and he passed away in 2013. He was a great guy. The lovely lady that recently passed was one of the sweetest and kindest persons I have ever known. Anyway, while at the visitation before the service we were talking to our bosses wife, we have been friends with the family for many years. In passing she said they took her out to see our lights this past season. We weren't home otherwise they would have stopped in. She then thought about it for a second and told us she's pretty sure that was the last thing they did together as a family before she got sick (again). She battled cancer extremely bravely for about 8 years. She's with Jesus now because we learned she accepted him as her Lord and Savior more than 10 years ago! It really hit me latter that our Christmas light show was there so this family can have that as one of the last fond memories of her. True I love making the lights blink but I absolutely love knowing that people are enjoying our show. If Chuck Smith hasn't told you or you haven't read it in his magazine articles let me tell you this. What we do matters! Yes, have fun but it's also a bit serious. Remember you are making life long memories for the people and especially the kids watching your show. Know that 10, 15 even 20 years from now some person will ask their mother or father "Hey, remember that house you took us to back when we were kids?" "We loved doing that!" I don't mean to bring anyone down just wanted to share something that touched my heart and really made me feel good. Hope everyone has a blessed night/day Thanks, Al
  24. After fifteen years or so, I find it necessary to get out of this hobby for health reasons. I have a large selection of LOR AC, DC, and various other controllers/components that are looking for new homes. I am not trying to sell them, but they are being offered free with only one catch, you must pick them up as I will not ship. If you know of anyone that might be interested in trying out this hobby, this might be a chance for them to get into it for minimal cost. All of the AC controllers are first generation boards in boxes with pigtails attached. Probably have about 20 AC controllers, several DC controllers, pixel controllers, 12x50 pixel tree, 24x50 and 6x50 pixel matrices, etc. I am not offering these to someone wanting to resell them, but to hobbyists who want to expand or get into the hobby. I am located in Casa Grande, AZ, midway between Phoenix and Tucson. If interested, please message me above or email at circus4u at msn.com
  25. Just want to say THANK YOU to all the folks on this forum that have shared sequences with not only myself, but to others as well. It's what helps to keep this crazy hobby of ours alive and well! I also want to give a THANK YOU to others on this forum that have gone far above and out of their way to help me with so many things, I won't mention specific names, but you folks know who you are, and how you have helped me to continue my display with encouragement and and so much more, again THANK YOU! There truly are a really GREAT BUNCH OF FOLKS ON THIS FORUM!. And finally to ALL the GREAT FOLKS at Light-O-Rama, that we all just affectionately call LOR, a really BIG THANK YOU! These folks at LOR have at many times gone far above and beyond to help folks with their displays, they have sent controllers out directly to folks that had one fail so they could get their display back up and running, even before those customers had to send the "bad" controller back in, their Help Desk folks do their best and, also go above and beyond to try and help folks keep their display up and running when software glitches or other issues arise, many times those issues caused by our own errors or misunderstanding of how something works, but they really go out on a limb sometimes to get folks software functional and/or their displays working again, they also supply parts so we can make repairs to our controllers or RGB lights, many times they do this at NO CHARGE and ON THEIR COST to get these to us. I know of NO OTHER company, at least none I've ever dealt with, that go above and beyond to help their customers like this, not one. There may be, but I, myself, have not dealt with a company so geared to keeping their products working that are in our, the customers hands. And WITHOUT LOR, many of us would not be able to do what we do that amazes neighbors, friends, and even those strangers that may happen on to our display.
  26. Http://YouTube.com/37iEkQ1fVVw
  27. No show for a few days now due to weather but hopefully everyone else's light are shining bright. ~~~~ Someone has please help me get off the number under my profile. HAPPY NEW YEAR JR
  28. Went a little happy on the pyro, the night I filmed this!! Those new cones were a little more potent than I thought!!
  29. Just an update on placing orders for 2019. We are now booked up as of right now for 2019. We are stopping taking orders for 2019. Never in my wildest dreams did I ever think that I would be saying this already.
  30. Hey Guys, Finally got off my Arse and filmed our house last night. Got a couple of videos uploaded to Vimeo Site Merry Christmas!!!
  31. My first Light-O-Rama youtube. Did displays for a few years but excited this year since neighbor wanted in on the action. While it only 5 channels versus 50+, a lot lot of fun for starters and sure it will grow next year. Good news neighbor set up his own house based on what I told him but I had to do the sequencing but very rewarding in the end - Enjoy! Feel free to comment/like on youtube please.
  32. After recording and making many many edits, I think this is the final version. I love the visualizer, but nothing beats real time
  33. Hi All, Here is a link to my 2018 sequences. https://www.dropbox.com/sh/mbp2py0map06edr/AAD_p4c8Ry-Cxd2KlofVcNgIa?dl=0 Feel free to download and use. All of the sequences are for S5. I upgraded to S5 earlier this year - It was a hard learning curve but well worth it. Enjoy! - Jade
  34. ***WARNING*** For those of you who are running S4 and wanting to change to S5, do yourself a favor and wait until after this Holiday season. S5 has a large learning curve and most of you will have issues and many questions so why take the chance of screwing up this years show. Stick with something you know and when the Holidays are over you can switch and have a year to learn S5. It is three weeks until lights on and there are lots of posts starting "I just switched to S5," so you must ask yourself "why," why switch so late in the game? So do yourself, the Forums and the Help Desk a favor and stick with what you know until January. Remeber KISS, Keep It Simple Stupid and don't make it harder on yourself.
  35. I was a new lighter years ago and knowing where I could find information would have been a big help. There is a ton of info on this site but these will get you started. LOR store - http://store.lightorama.com/ LOR license comparison - http://www1.lightorama.com/sequencing-suite-levels/ LOR software download - http://www1.lightorama.com/sequencing-software-download/ LOR equipment manuals - http://www1.lightorama.com/documentation/ LOR Firmware updates - http://www1.lightorama.com/firmware-updates/ LOR network speeds - http://www1.lightorama.com/network-speeds/ LOR tutorials - http://www1.lightorama.com/tutorials/ LOR Help Desk - http://helpdesk.lightorama.com/
  36. We have had a sleigh and several reindeer made from plywood for several years now, bought them at a garage sale so no idea how old they really are. The sleigh hasn't weathered very well so I needed to make a new one. I also wanted to make it easy to take apart and put together so we can store it indoors. The old one was all screwed together. We started with a sheet of exterior grade plywood and one of the old sleigh sides as a pattern. Which became a couple of these: And then this: I think the inspector approves First coat of primer on everything, a couple coats of white paint to come:
  37. The “gofundme” part destroys it for me. “Gimme” is a national problem. Puking. Go pay your own way.
  38. How many reasons do you need? Returned defective product to be replaced (per previous conversation), got it back REPAIRED, returned differently than sent, one item STILL defective, expressed my displeasure using the best NAVY language I could muster. They did not approve of my assessment of his product, customer service skills, nor his parentage. In other words for being me.
  39. Well you have all year to create sequences so go ahead and sequence away. You have to at least try. Seriously.
  40. This is my first video of the season. I only created several new sequences for 2018. Enya's Echoes In Rain was one of them.
  41. May today be filled with happiness and cheer. Thank you to everyone who has helped me get this far in the hobby
  42. That's really nice! I never got a comment that nice, but on rare occasions, something like a bottle of wine or other little gift will end up on my doorstep with a nice note. HOWEVER, there always seems to be at least one Grinch in every neighborhood. In the 20 years, I've been doing this, I only ever got one negative comment and it was recently. A neighbor on another street up the hill (known to be a Grinch for every occasion), sent an email with... "You know all those lights are distracting as I drive by your house to get home from work.". To which I reply... "You know there are 3 other roads that lead to your house from Lacerta Drive, and one of them is shorter. And by the way, the speed limit is 25, not 40 ! My cameras observe you."
  43. I had a couple ask me a few days ago how I got the candy canes to spin without tearing the cords out. I told them I bought them that way. They said they will come back during the day to see what I am using. Tom
  44. Surprisingly I had everything set up by this past Sunday despite getting a late start due to Mother Nature not cooperating (unseasonably cold & windy). This isn't going to be one of our "official" display videos, just a 5 song test to make sure everything is lighting up as it should. The firesticks & leaping arches are new this year so I really wanted to see how they'd look. I forgot to turn on the Nativity scene and couldn't find my camera tripod, sorry for the very shaky video lol. https://youtu.be/lEnYzG1MJpE
  45. People will be offended because it represents Christmas. "Just let it go" and do what makes you happy.
This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...