Jump to content
Light-O-Rama Forums

All Activity

This stream auto-updates     

  1. Past hour
  2. For anyone else who ran into the issue with 5.3.10 where the creation of .play files caused the size of the .play file to almost double in size (compared to the .loredit file) instead of actually shrinking the size, it looks like v5.3.14 has fixed this issue. So if you had to go back to an older version of S5 to get your 2019 show running, you should be safe to use the latest. I've just upgraded and tested the compression process and the compression now matches the size of the compression in the older version.
  3. Yes, but as my friend said, you have to set them up but not only in HU but also SE. In order o get 100 pixel rows you have to tell SE that you will have 100 pixels. Otherwise you will only have 50 pixels per port. You can verify this by opening the ports and then open the RGB in one port. JR
  4. Today
  5. So, also thinking about doing a Halloween show at my son-in-law's house this year since he gets many many many (did I say many yet?) many more trick-or-treaters than we do and was looking at video projection, but everything I can find looks like you can only run one video camera in S4, so now thinking of doing 5 singing faces within one video. At first I thought maybe I could buy some of the pre-created styrofoam tombstones and put a white oval protruding out of it and video onto the oval, then place the tombstones so the faces project onto them, but the problem is that the video doesn't seem to have a transparency and will project black across the background and the tombstones. So now I'm thinking of cutting a shape out of white pvc board like a tombstone and then projecting that tombstone image (5 tombstone images) onto the tombstones and I decided to give my first video a try with just a cheap tombstone. The first video was ok when I transported it, but believe it or not the frames per second was too high and made it look very smooth, and the exposure was too low making it look to real. So, I increased the exposure and lowered the FPS down to 7, and now feel pretty confident in how I might go about doing this (see video below). Has anyone else done anything like this? If so, how did you give it that creepy feel? https://1drv.ms/v/s!Anvyz6B-R-i9gsNOTMZwvIiZll_kOg
  6. Yes the number is 51 Use the HU to set the number on a port to 100 Be aware that 100 nodes x 8 can overload the power bus (bank) without power injecting. for all white mode Also if using 5V nodes: They Will need power injection as the typical limit is 50 without Also: All nodes must be the same chip and color order
  7. If I wanted to connect to 50ct strings together would the 2nd string start at 51? I would like to have a total of 100 per port on my pixie 16. thanks Gonzo
  8. Thanks again, JR! I appreciate the share!
  9. The front of the star is 1/8" thick so that 12mm nodes will snap into the hole. However, some of the 12mm pixels are a bit thinner than others. There may be some pixels that you will want to hot glue into place after snapping them in.
  10. Has anyone seen or created a sequence for Imagine Dragons, Khalid - Thunder / Young Dumb & Broke? This is my wife's favorite song and I want to add it to my show. If someone has it, could you please send a copy to tbone0012@gmail.com "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thanks for sharing!
  11. Could I please get a copy? I would like a copy sent to tbone0012@gmail.com" "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thanks for sharing!
  12. Could I please get a copy of the 16 channel? I would like a copy sent to tbone0012@gmail.com" "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thanks for sharing!
  13. I would like a copy sent to tbone0012@gmail.com" "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thanks for sharing!
  14. I would like a copy sent to tbone0012@gmail.com" "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thanks for sharing!
  15. Sent You will need to adjust the unit ID and settings unless you have it on LOR Reg NW unit ID 30 JR
  1. Load more activity
×
×
  • Create New...