Use a pixie4 with RGB10W flood?

[brichi]

I want to buy a few of these - http://store.lightorama.com/rgbfl10wa.html

will these run off my regular pixie4 controller?

it says """

• Requires a DC-PWM driver for RGB effects (use the CMB24D)"""

 

do i really need a 24 port dumb controller or can i just use the pixie i have, thanks!

[B.Y.R.G.]

I will confirm what LOR has stated.  You need a dumb controller to run those.

[brichi]

that kinda sucks in a way, i want 1 flood for over my doorway so i need to buy a 24 output $110 controller to do so?

Edited February 27, 2017 by brichi

[Dennis Laff]

If you have a dmx network setup you can buy a simple 3 channel dumb controller for about $10.00 

[TheDucks]

remember the   output is 24 Monochrome ports  or 8 RGB ports (any combination)

also you will need 1 or 2 power supplies to fully use the board which is divided into 2 banks of 12 mono ports. Bank 1 must be 12V or you need an AUX 12V PSU

 

I am waiting for the LOR sale , hoping these will be one of the items. I will be using groups of 3 ports to drive each Candy Cane Propeller (each cane now contains White LED strips).

 

So, there are lots of uses for DUMB ports, Let your imagination loose

[brichi]

thanks guys,,,

 

Im not using DMX, all LOR pixies with the usb to ethernet converter

[George Simmons]

If you want a smaller board, LOR sells a 16-channel DC board.  (CMB16D)

One PS of 200W or more will power the CMB24D quite nicely.