Derkngoogly Posted October 22, 2016 Share Posted October 22, 2016 Ok downloaded a sequence played it the color was wrong on some things. Also some letters are distorted. I changed colors order in alphapix but still not right. 12 ribbons put 1st input bottom left went up. Letters are right etc except some are distorted at times one network cat 5 is about 40ft ty don Link to comment Share on other sites More sharing options...
Dennis Laff Posted October 22, 2016 Share Posted October 22, 2016 What is the distance from controller to the first pixel. Link to comment Share on other sites More sharing options...
wbaker4 Posted October 22, 2016 Share Posted October 22, 2016 Hopefully you are not feeding power through the Cat 5 cable. If so I suggest that you set all the pixels to white and measure the voltage at the first and last pixel. Link to comment Share on other sites More sharing options...
Derkngoogly Posted October 22, 2016 Author Share Posted October 22, 2016 Dennis, it is about 5ft used 5ft cords Link to comment Share on other sites More sharing options...
Derkngoogly Posted October 22, 2016 Author Share Posted October 22, 2016 Wbaker, i am using cat5 from puter to controller, 5 ft to controller to ccr. Link to comment Share on other sites More sharing options...
Dennis Laff Posted October 23, 2016 Share Posted October 23, 2016 How do you have your strings connected one string per universe? Link to comment Share on other sites More sharing options...
Derkngoogly Posted October 23, 2016 Author Share Posted October 23, 2016 Did get color fixed, yes one string for 50 pixels or one ccr strip. Had to reverse color in controller. I think maybe a setting in ss is wrong will look tom. First year and learning a lot already lol. Ty for help Link to comment Share on other sites More sharing options...
Recommended Posts