LORAdmin Posted August 16, 2016 Share Posted August 16, 2016 It's here. Info and discussion here. Link to comment Share on other sites More sharing options...
BMurray Posted August 16, 2016 Share Posted August 16, 2016 It on like Donkey Kong people!!!! Link to comment Share on other sites More sharing options...
doubleohwhatever Posted August 16, 2016 Share Posted August 16, 2016 Annnnnd my shopping is done! A tiny bit disappointed to not see the Pixie1 but the Pixie4 will work just as well! I just *really* hope they actually ship these by mid-September so I have time to get everything ready for Halloween. Link to comment Share on other sites More sharing options...
Brucey Posted August 16, 2016 Share Posted August 16, 2016 Still no software on sale Toying with buying additional CCP's to make my 12 string tree a 16... Link to comment Share on other sites More sharing options...
Brucey Posted August 16, 2016 Share Posted August 16, 2016 21 minutes ago, Brucey said: Still no software on sale Toying with buying additional CCP's to make my 12 string tree a 16... I just couldn't fight the urge, I grabbed more CCP's and the white pixel mounting strips.... Link to comment Share on other sites More sharing options...
doubleohwhatever Posted August 16, 2016 Share Posted August 16, 2016 I don't think I've ever seen the software on sale other than maybe the "getting started" packages. Link to comment Share on other sites More sharing options...
Don Posted August 16, 2016 Share Posted August 16, 2016 (edited) 5 hours ago, Brucey said: Still no software on sale Toying with buying additional CCP's to make my 12 string tree a 16... I've been around here since 2004. Software has never been on sale. Edited August 16, 2016 by Don Link to comment Share on other sites More sharing options...
LOR Staff Posted August 16, 2016 Share Posted August 16, 2016 FYI.... Looks like I was wrong about the hardware for the Pixel Trees. According to the sale page, it comes with the center pole and assorted hardware COMPLETE. WOO! Link to comment Share on other sites More sharing options...
Dennis Laff Posted August 16, 2016 Share Posted August 16, 2016 DevMike I don't see the pixel trees forsale where are they listed? Link to comment Share on other sites More sharing options...
LOR Staff Posted August 16, 2016 Share Posted August 16, 2016 RGB Products/Plug N Show Complete Pixel Tree Kit http://store.lightorama.com/copitrkit.html Link to comment Share on other sites More sharing options...
Dennis Laff Posted August 16, 2016 Share Posted August 16, 2016 thanks Link to comment Share on other sites More sharing options...
ItsMeBobO Posted August 16, 2016 Share Posted August 16, 2016 Thanks for fielding questions here Mike and for getting the CCP/B string on there. I have two more Qs? There is no sale price on the dumb ribbon extensions http://store.lightorama.com/rgbduriinria.html and the dumb strips are not shown. Is that right? There is a new assembled product http://store.lightorama.com/10wrgbflplpa.html I purchased several boards, lights, PSU in spring and I am lacking the enclosures. Can I get just the enclosure with mounting panel? Link to comment Share on other sites More sharing options...
jerrymac Posted August 16, 2016 Share Posted August 16, 2016 (edited) On 8/8/2016 at 2:41 PM, DevMike said: ............................. I should also note (before anyone else tries to claim otherwise) those 2400 pixels on those 3 trees were all individually controlled. In other words we did not cheat and put controllers on identical Unit IDs and have them duplicating each other. We used 4 total PixCon16's (1 each for the 16x25 trees, and 2 for the 32x50) on 4 separate unit IDs @ 500K ELOR. We were pushing all 7200 channels from a single uMP3 director. Sorry wasn't at the expo. I take it from the above that the ELOR's will run RGB pixels as long as they are running under LOR 485 protocol (with the pix con line of controllers), Not under E1.31? Edited August 16, 2016 by jerrymac wrong key stroke Link to comment Share on other sites More sharing options...
LOR Staff Posted August 16, 2016 Share Posted August 16, 2016 4 minutes ago, jerrymac said: Sorry wasn't at the expo. I take it from the above that the ELOR's will run RGB pixels as lont a That is probably still not going to happen. Remember, ELLs are speed limited to 115K, and those 3 were running ELOR @ 500K. Link to comment Share on other sites More sharing options...
jerrymac Posted August 16, 2016 Share Posted August 16, 2016 On 8/8/2016 at 2:41 PM, DevMike said: Sorry , Cerebral Flatulence. Saw ELOR and was thinking ELL. Darn !! Started to drool, then crashed back to reality. Link to comment Share on other sites More sharing options...
LOR Staff Posted August 16, 2016 Share Posted August 16, 2016 13 minutes ago, ItsMeBobO said: Thanks for fielding questions here Mike and for getting the CCP/B string on there. I have two more Qs? There is no sale price on the dumb ribbon extensions http://store.lightorama.com/rgbduriinria.html and the dumb strips are not shown. Is that right? There is a new assembled product http://store.lightorama.com/10wrgbflplpa.html I purchased several boards, lights, PSU in spring and I am lacking the enclosures. Can I get just the enclosure with mounting panel? Extensions are not on sale. We won't have any stock of the dumb pixel strips until October so they are not part of the sale. The enclosures are available in the store, but I don't think those mount plates are. In fact, they are not even in the warehouse yet. If you open a help desk ticket we may be able to get one to you that way, but I am not 100% sure if we will sell them separately or not. Link to comment Share on other sites More sharing options...
Vince4xmas Posted August 16, 2016 Share Posted August 16, 2016 When will documentation be available on the new "Pixie" controllers? Link to comment Share on other sites More sharing options...
LOR Staff Posted August 16, 2016 Share Posted August 16, 2016 25 minutes ago, Vince4xmas said: When will documentation be available on the new "Pixie" controllers? The data sheets for the Pixies were posted earlier today. (http://www1.lightorama.com/documentation/) The actual manual will not be ready until they are ready to ship. Link to comment Share on other sites More sharing options...
ItsMeBobO Posted August 16, 2016 Share Posted August 16, 2016 Did I miss the announcement of S5? http://www1.lightorama.com/PDF/Pixie4-Datasheet.pdf second paragraph on the right. Link to comment Share on other sites More sharing options...
Brucey Posted August 16, 2016 Share Posted August 16, 2016 3 minutes ago, ItsMeBobO said: Did I miss the announcement of S5? http://www1.lightorama.com/PDF/Pixie4-Datasheet.pdf second paragraph on the right. I caught that as well and was wondering myself... New version coming out soon? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now