dollar4bill Posted January 3, 2016 Share Posted January 3, 2016 This season was my 1st and i had two cmb24d controllers and two CTB16PC-COMPLETE controllers http://store.lightorama.com/ctascpa.html that were ordered in May 2015. I'm planning for next year and want to add the pixcon16 contoller. If i update the firmware on all controllers and have the pro license of s4, will they all work on the enhanced lor network? So i only need the 1 highspeed usb red dongle (which i already have) and will only use the 1 com port? I've looked at this page http://www1.lightorama.com/network-speeds/ and to me, it looks like all of my controllers will work. I'm looking for a confirmation before i place orders. Thanks in advance. Link to comment Share on other sites More sharing options...
k6ccc Posted January 3, 2016 Share Posted January 3, 2016 The Gen3 controllers have a green LED whereas the older controllers have a red LED. Based on when you bought them, they are most likely Gen3. Link to comment Share on other sites More sharing options...
dollar4bill Posted January 3, 2016 Author Share Posted January 3, 2016 ok so after i confirm they're gen3 and their firmware is up to date, I can run them on the enhanced lor network along with the pixcon16 controller? Link to comment Share on other sites More sharing options...
k6ccc Posted January 3, 2016 Share Posted January 3, 2016 Yes, the Gen3 controllers can operate on an enhanced network. Link to comment Share on other sites More sharing options...
aesl1982 Posted January 3, 2016 Share Posted January 3, 2016 Exocet the pixcon 16 can run 1000k and I believe the xontrollers can only go to 500k Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now