Jump to content
Light-O-Rama Forums

CCPixel


Captain Buffett

Recommended Posts

I have one 50 pixel string was working fine. Then pixel 31-50 became stuck on white. All the time, controller working or not. Could this be caused by moisture in bulb 31 causing +5 volts shorting to the Data In contact? Any other thoughts?

 

Thanks

Link to comment
Share on other sites

After replacing pixel 31, no change. Replaced pixel 30 and we are back in business. Hopefully this may answer some ones question in the future.

  • Like 1
Link to comment
Share on other sites

  • 1 year later...

Generally when you see behavior such as this, it's the pixel BEFORE the problem one that's the culprit. Glad you sorted it out.

Mike

Link to comment
Share on other sites

That is one of the more common failure modes of most types of pixels.  And as Mike said, it is usually (not always) the last pixel that appears to be working that's actually the problem.

 

Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...