chacquie Posted August 30, 2015 Share Posted August 30, 2015 I've got a CMB24D connected to 8 10w floods. Just curious what you guys are using as an enclosure.? I think the standard Light-o-rama box may not have large enough holes for 8 flood leads and two thick power leads. I bought a "sock it" box which seems pretty weather resistant but it doesn't look like I'll be able to secure the board inside that without compromising the weather resistance. Link to comment Share on other sites More sharing options...
1983ss454 Posted August 31, 2015 Share Posted August 31, 2015 I used a cable guard 1500, you can make your own mounting board for Inside or places like diyledexpress have them pretty cheap to mount the board and power supply inside the box 1 Link to comment Share on other sites More sharing options...
Mr. P Posted August 31, 2015 Share Posted August 31, 2015 CG1500 1 Link to comment Share on other sites More sharing options...
larryk5 Posted August 31, 2015 Share Posted August 31, 2015 You should only need one power lead to support the 8 floods. The CG1500 is large enough to hold both the controller and the power supply. Holiday Coro actually makes a mounting kit just for this purpose. 1 Link to comment Share on other sites More sharing options...
mpageler Posted August 31, 2015 Share Posted August 31, 2015 Do a thread search on "enclosure" and you'll find a number of past threads on the subject. Link to comment Share on other sites More sharing options...
arw01 Posted August 31, 2015 Share Posted August 31, 2015 a Sockit Box, nothing specific to screw it to, but it has 5 silicon pads to wrap around the cords as they come out, low profile enough for just behind a rock wall or other small element. 1 Link to comment Share on other sites More sharing options...
chacquie Posted September 2, 2015 Author Share Posted September 2, 2015 Thanks for the suggestions! Link to comment Share on other sites More sharing options...
Recommended Posts