Tigerdmd Posted October 30, 2014 Share Posted October 30, 2014 Anyone know what I did wrong and how to fix it? Here's a video Link to comment Share on other sites More sharing options...
Tigerdmd Posted October 30, 2014 Author Share Posted October 30, 2014 not sure why video want load Link to comment Share on other sites More sharing options...
Denny Posted October 30, 2014 Share Posted October 30, 2014 I don't have any CCRs, so don't know if this would apply. On my matrix, you designate where pixel one is located, if this is true on the Cosmic Color Devices, you may have designated pixel one to begin at the other end of your matrix. Link to comment Share on other sites More sharing options...
Bizywk Posted October 30, 2014 Share Posted October 30, 2014 (edited) A couple of things might work for you. Change your designated "First Pixel" as your first option. If that doesnt work, it will take a little more time, but you could always reprogram using BoBO's flipper as an intermediary software. Copy your matrix programming from within SE, open the "Saved Clipboard" in his software, flip, save and re-paste back into SE. If you were using generic pixels and a Sansdevice (E6804 or E682), you could just click the "Reverse" button on the applicable outputs. The controller would simply do the inversion for you. Edited October 30, 2014 by Bizywk Link to comment Share on other sites More sharing options...
jerrymac Posted October 30, 2014 Share Posted October 30, 2014 One thing to remember when doing text on a horizontal matrix. We read left to right but the text has to be scrolled from right to left. If your sequencer layout matches your matrix. first row left, last row far right it will scroll backwards. the beginning if the text must start on the far right side of the matrix. how depends on what you are sequencing with. Link to comment Share on other sites More sharing options...
George Simmons Posted October 30, 2014 Share Posted October 30, 2014 Maybe you're looking at the back side of the matrix. Have you tried turning it around, or walking around it? Link to comment Share on other sites More sharing options...
lightzilla Posted October 31, 2014 Share Posted October 31, 2014 (edited) Which one of these four did you chose when you used the ccr Matrix Wizard? Top Left - Bottom Left - Top Right - Bottom Right If Bottom Right then you need to set your ribbons accordingly. Then it should play right. It will play just like it did in Superstar if you choose the right side in Superstar. Edited October 31, 2014 by lightzilla Link to comment Share on other sites More sharing options...
Recommended Posts