packen Posted October 29, 2014 Share Posted October 29, 2014 I am trying to copy/paste part of a sequence into another sequence. I can copy the section i want but when i go to paste it in another sequence, the paste timing is grayed out and wont let me do it. Is it possible to copy from one sequence and paste into another? Link to comment Share on other sites More sharing options...
Don Posted October 29, 2014 Share Posted October 29, 2014 You're probably trying to paste the timings into a fixed timing grid. Create a new free form grid, and paste the timings from the other sequence to the newly created grid in the new sequence. Link to comment Share on other sites More sharing options...
packen Posted October 29, 2014 Author Share Posted October 29, 2014 Don, I just tried what you said and it would let me paste into the new blank grid, the only problem is the two sections i want to put together have different timings so when i go to paste the second sequence in it doesnt come out right. Link to comment Share on other sites More sharing options...
Don Posted October 29, 2014 Share Posted October 29, 2014 Look on the left side of the Sequence Editor for "Paste by Time." That will ignore the cells, and paste, well, by time. Link to comment Share on other sites More sharing options...
packen Posted October 29, 2014 Author Share Posted October 29, 2014 I will try that. What i did get to work was start with a blank grid, copy timing from sequence 1, paste it into new blank grid, then copy the music selections into that, then delete the grid and do the same with sequnce 2 that i did with sequence 1. Your way sounds a lot easier though. Thanks for your help. Ive got a lot to do and a short time to get it done. Link to comment Share on other sites More sharing options...
Recommended Posts