raven1708 Posted October 23, 2014 Share Posted October 23, 2014 Hello, I know time has been short but this is my first year getting my display up and going and the setting up the hardware took allot longer than i thought. As time runs out i know i am not going to have a chance to really try and get to sequence before Halloween. I was wondering if anyone had some sequence that they could convert for my setup or could build me one. I am not asking for free, and i understand that your time is important and i don't have a problem with compensating you for it. I currently have 2x 16 Channel controllers, 8 RGB strobes with controller, and a p12s controller for the CCR. I have attached an outline of my house that the smart pixel ribbons are run and where the faces are. Also the red squares are where some of the stobes are going to be. (i havent used all 8, open to where the others should go).The faces use 7 channels each. 1:top of eyes2:bottom of eyes3:top lip4:bottom lip5:half open top6:half open bottom7: OThank you for any help Link to comment Share on other sites More sharing options...
nader Posted October 23, 2014 Share Posted October 23, 2014 Read herehttp://forums.lightorama.com/index.php?/topic/23827-i-do-singing-faces-for-halloween-and-christmas-sequences-for-free/its a start for faces and you can use the instant sequence in Super Star for CCR Link to comment Share on other sites More sharing options...
Recommended Posts