• Announcements

    • LORAdmin

      S5 Beta Comments   07/16/2017

      Please keep all comments about S5 in the Open Beta General Comments section. This will help the developers by only have to look in one area of the forums for comments/questions/concerns about S5.
htebault

firmware update to 12 ccr tree - a success

6 posts in this topic

In building out the 12 CCR tree this year, I had the plesasure to turn on all for the first time, using the new high speed USB controller - It all works! I then found the latest hardware utility has a wonderful feature that allows me to update the firmware of each of the 12 CCR controllers one at a time - excellent feature, thank you.

In running a series of programmed songs, it appears the 12 CCR on Aux-A network were working well wiht no apparent delays - Is there any utility that might be available to evaluate the traffic loading ?

 

The show this year will have the 12CCR tree on on high speed circuit, and three regular controllers on a single standard USB circuit.

Share this post


Link to post
Share on other sites

Curious - were you able to update the firmware of your CCRs without manually plugging each one into the computer?  I have my setup ready to run the show, 4 CCRs, 2 16-channel 1602 3rd gen controllers, and a 16-channel DC board.  - ALL need firmware updates, but I REALLY don't want to have to unplug all of them and do them individually!!!

Share this post


Link to post
Share on other sites

Curious - were you able to update the firmware of your CCRs without manually plugging each one into the computer?  I have my setup ready to run the show, 4 CCRs, 2 16-channel 1602 3rd gen controllers, and a 16-channel DC board.  - ALL need firmware updates, but I REALLY don't want to have to unplug all of them and do them individually!!!

I've had 2 CCR's and 5 16 channel controller all connected together and was able to update each one. There is a drop down window with all the controllers listed, just select which one you want to update and away you go.

Share this post


Link to post
Share on other sites

I just finished updating all the firmware for everything :D :D :D

 

Is there anywhere that specifies what the changes are in the CCR behavior from version to version ?

Share this post


Link to post
Share on other sites

HTEBAULT,

 

Are you running all 12 CCR's on one network? I remember someone saying that it should be to networks. Maybe the 500K controller allows for this? 

Share this post


Link to post
Share on other sites

I have 2 networks; one with 5 CCRs another with 4. The other night I switched the network speed and the entire show kinda stopped midway through a song and then picked back up. Not sure what the deal with that was! I'm about to go live this weekend and am kinda worried !!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now