larry p Posted January 26, 2012 Share Posted January 26, 2012 I would like to add 12 volt lights to my show can someone suggest what LOR controler is best for this?Thank you for your Help Link to comment Share on other sites More sharing options...
Dan C Posted January 26, 2012 Share Posted January 26, 2012 This is exactly what you need. You will also need a 12v power source.http://store.lightorama.com/cmdedcca2.html Link to comment Share on other sites More sharing options...
WilliamS Posted January 27, 2012 Share Posted January 27, 2012 Dont forget a power supply that will work for the load you plan on adding to the card!This LOR board can output a ton of power so be sure to give yourself some overhead when your looking at power supplys. Link to comment Share on other sites More sharing options...
larry p Posted January 27, 2012 Author Share Posted January 27, 2012 Thank you for your help Link to comment Share on other sites More sharing options...
larry p Posted January 27, 2012 Author Share Posted January 27, 2012 Thank you for you help this is great information and very helpful Link to comment Share on other sites More sharing options...
Ozemate Posted January 27, 2012 Share Posted January 27, 2012 I am planing to use 2 12v Deep Cycle batteries for the power supply that will be recharged when not in use this way will have tons of grunt when needed. Link to comment Share on other sites More sharing options...
CaptainCook Posted February 2, 2012 Share Posted February 2, 2012 Don't overlook the fact that 12V batteries will actually be more like 13.2V. If you use them to power 12V LED strips you will burn out the LEDs and/or any pixel chips. Link to comment Share on other sites More sharing options...
larry p Posted February 2, 2012 Author Share Posted February 2, 2012 Thank you for your info Link to comment Share on other sites More sharing options...
TitusCarnathan Posted February 7, 2012 Share Posted February 7, 2012 you would really need to put a voltage regulator on the battery to prevent over voltage which I dont see 13 volts hurting it but by the time you buy the batteries and the chargeryou might as well buy a dc power supplylook on amazon for dc power supplies Link to comment Share on other sites More sharing options...
mmais68569 Posted February 8, 2012 Share Posted February 8, 2012 I used 4 of these power supplies & had no problems. Mikehttp://www.ebay.com/itm/170574686185?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now