| Moderated by: LightORamaDan, bob |
|
||||||||||||||
| problem with s2 software | Rate Topic |
| Author | Post |
|---|
| Posted: Wednesday February 22nd, 2012 03:32 am |
|
1st Post |
|
Mr Bean Member
|
When I go to open my sequence editor, the message "Failed to load control 'SSTab' from TABCTL32.ocx. Your version of TABCTL32.OCX may be outdated. Make sure you are using the version of the control that was provided with your application." What does this mean and is it an easy fix. I am running on Windows7. I updated my S2 software to the highest version. I need some help with this problem. I need to start programing for this year.
|
||||||||||||||
| |||||||||||||||
| Posted: Wednesday February 22nd, 2012 10:04 am |
|
2nd Post |
|
cenote Member 
|
Until a developer or somebody with more knowledge than me, this may do it. http://devonenote.com/2010/02/register-comdlg32-ocx-on-x64-win7/
____________________ 3 universes worth of channels  Lights On Horseshoe - Like us Here |
|||||||||||||
| ||||||||||||||
| Posted: Wednesday February 22nd, 2012 04:32 pm |
|
3rd Post |
|
LightORamaDan One of your administrators
|
If the register does not work, then try re-running the installer and pick repair. If that does not work try re-running the installer and un-install then re-install the software. Dan
|
||||||||||||||
| |||||||||||||||
| Posted: Thursday February 23rd, 2012 11:08 pm |
|
4th Post |
|
Mr Bean Member
|
did that does not work
|
|||||||||||||
| ||||||||||||||
| Posted: Friday February 24th, 2012 02:47 pm |
|
5th Post |
|
bob One of your administrators 
|
I would try the following: Open up your computer's Start Menu, and then open its Accessories folder. In the Accessories folder, there should be an entry labeled "Command Prompt". Right click on that, and a popup menu should open. From the popup menu, select "Run as administrator". That may cause a message to come up asking (something like) if you're sure you want to allow this program to make changes to your computer. Click "Yes". A command prompt window should then open. It will likely give you a prompt that says "C:\Windows\system32". At that prompt, type the following line: regsvr32 tabctl32.ocxThat should cause a message to pop up saying "DllRegisterServer in tabctl32.ocx succeeded." If it says something else, please let me know. Then try running the program again.
|
||||||||||||||
| |||||||||||||||
| Posted: Saturday February 25th, 2012 01:25 pm |
|
6th Post |
|
Mr Bean Member
|
i found the problem. i haved to run it in compatability mode with windows xp service pack 2. i did that and it fixed the problem. thank you every one for all your help.
|
|||||||||||||
| ||||||||||||||
| Current time is 05:49 am | |
| Light-O-Rama Forums > LOR Software > LOR S2 Software Suite > problem with s2 software | Top |
